PN7161B1HN-C100Y vs PN7160A1HN Vergleich
Detaillierter Direktvergleich von PN7161B1HN-C100Y von NXP Semiconductors und PN7160A1HN von NXP Semiconductors. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
NXP Semiconductors
PN7161B1HN-C100Y - NFC Controller with NCI Interface | NXP
PN7161B1HN-C100Y ✓ Aktiv
Spezifikationsvergleich
| Parameter | PN7161B1HN-C100Y | PN7160A1HN |
|---|---|---|
| Marke | NXP Semiconductors | NXP Semiconductors |
| Kategorie | RF Transceivers | RF Modules |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $3,74 | $2,15 |
| Funktion | NFC Controller with NCI interface | — |
| RF Frequency | 13.56 MHz | — |
| Supported Standards | FeliCa, ISO 14443, ISO 15693, MIFARE, NFC Forum, EMVCo | — |
| Host Interface | SPI (NCI) | I2C (default, hardware) / SPI (EEPROM-configurable) |
| Supply Voltage (VDD) | 1.65 V to 1.95 V | — |
| Supply Voltage (VBAT/VIN) | 3.0 V to 3.6 V | — |
| Gehäuse | 40-VFQFN Exposed Pad (HVQFN-40, 6 mm x 6 mm) | HVQFN-40 (6 x 6 x 0.85 mm) with Exposed Pad |
| Montageart | Surface Mount | Surface Mount |
| Feuchtigkeitsempfindlichkeitsgrad (MSL) | 3 | — |
| Peak Reflow Temperature | 260 C | 260 C (per JEDEC J-STD-020) |
| Betriebstemperatur | -40 C to +85 C | -30 C to +85 C |
| EMVCo Compliance | EMV L1 compliant | — |
| Apple ECP Support | Yes (after formal authorization) | — |
| RoHS-Status | Compliant | Compliant |
| Lead-Free | Yes | — |
| Protocol | NFCIP-1, NFCIP-2 | — |
| Antenna Outputs | Single-ended TX, differential RX | — |
| Integrated LDO | Yes (RF supply) | — |
| Product Type | — | NFC Plug and Play Controller |
| Operating Frequency | — | 13.56 MHz |
| Supported Protocols | — | FeliCa, ISO 14443, ISO 15693, MIFARE, NFC |
| NCI Version | — | NCI 2.0 (pre-loaded firmware) |
| Digital Supply Voltage | — | 1.65 V to 1.95 V (VDD) |
| Analog/RF Supply Voltage | — | 3.0 V to 3.6 V (VBAT, VBAT_PA) |
| I/O Supply Voltage | — | 1.65 V to 1.95 V (VDDIO) |
| I2C Address | — | 0x28 (7-bit) |
| RF Output Power | — | [DATA_NEEDED: TX output power dBm] |
| Antenna Pins | — | TX1, TX2 (differential); RX1, RX2 |
| Integrated MCU Core | — | ARM Cortex-M0 (ROM-resident NCI firmware) |
| Operating Modes | — | Reader/Writer, Card Emulation (P2P), Tag Detection |
| Modes of Operation | — | Active, Standby, Hard Power Down, Low-Power Polling |
| Moisture Sensitivity Level | — | MSL 3 |