PN7161B1HN-C100Y vs PN7160A1HN Comparación
Comparación detallada lado a lado de PN7161B1HN-C100Y por NXP Semiconductors y PN7160A1HN por NXP Semiconductors. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
NXP Semiconductors
PN7161B1HN-C100Y - NFC Controller with NCI Interface | NXP
PN7161B1HN-C100Y ✓ Activo
Comparación de especificaciones
| Parámetro | PN7161B1HN-C100Y | PN7160A1HN |
|---|---|---|
| Marca | NXP Semiconductors | NXP Semiconductors |
| Categoría | RF Transceivers | RF Modules |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $3,74 | $2,15 |
| Función | NFC Controller with NCI interface | — |
| RF Frequency | 13.56 MHz | — |
| Supported Standards | FeliCa, ISO 14443, ISO 15693, MIFARE, NFC Forum, EMVCo | — |
| Host Interface | SPI (NCI) | I2C (default, hardware) / SPI (EEPROM-configurable) |
| Supply Voltage (VDD) | 1.65 V to 1.95 V | — |
| Supply Voltage (VBAT/VIN) | 3.0 V to 3.6 V | — |
| Encapsulado | 40-VFQFN Exposed Pad (HVQFN-40, 6 mm x 6 mm) | HVQFN-40 (6 x 6 x 0.85 mm) with Exposed Pad |
| Tipo de montaje | Surface Mount | Surface Mount |
| Nivel de sensibilidad a la humedad (MSL) | 3 | — |
| Peak Reflow Temperature | 260 C | 260 C (per JEDEC J-STD-020) |
| Temperatura de funcionamiento | -40 C to +85 C | -30 C to +85 C |
| EMVCo Compliance | EMV L1 compliant | — |
| Apple ECP Support | Yes (after formal authorization) | — |
| Estado RoHS | Compliant | Compliant |
| Lead-Free | Yes | — |
| Protocol | NFCIP-1, NFCIP-2 | — |
| Antenna Outputs | Single-ended TX, differential RX | — |
| Integrated LDO | Yes (RF supply) | — |
| Product Type | — | NFC Plug and Play Controller |
| Operating Frequency | — | 13.56 MHz |
| Supported Protocols | — | FeliCa, ISO 14443, ISO 15693, MIFARE, NFC |
| NCI Version | — | NCI 2.0 (pre-loaded firmware) |
| Digital Supply Voltage | — | 1.65 V to 1.95 V (VDD) |
| Analog/RF Supply Voltage | — | 3.0 V to 3.6 V (VBAT, VBAT_PA) |
| I/O Supply Voltage | — | 1.65 V to 1.95 V (VDDIO) |
| I2C Address | — | 0x28 (7-bit) |
| RF Output Power | — | [DATA_NEEDED: TX output power dBm] |
| Antenna Pins | — | TX1, TX2 (differential); RX1, RX2 |
| Integrated MCU Core | — | ARM Cortex-M0 (ROM-resident NCI firmware) |
| Operating Modes | — | Reader/Writer, Card Emulation (P2P), Tag Detection |
| Modes of Operation | — | Active, Standby, Hard Power Down, Low-Power Polling |
| Moisture Sensitivity Level | — | MSL 3 |