SN65HVD06D vs SN65HVD78D Comparison
Detailed side-by-side comparison of SN65HVD06D by Texas Instruments and SN65HVD78D by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
SN65HVD06D - High-Output RS-485 Transceiver, 8-SOIC | Texas Instruments (Tape & Reel)
SN65HVD06D ✓ Active
Specification Comparison
| Parameter | SN65HVD06D | SN65HVD78D |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Interface ICs | USB Interface ICs |
| Lifecycle Status | Active | Active |
| Function | Transceiver | — |
| Protocol | RS422, RS485 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half | — |
| Data Rate | 10 Mbps | — |
| Receiver Hysteresis | [DATA_NEEDED: receiver hysteresis mV] | — |
| Supply Voltage | 4.5 V to 5.5 V | — |
| Operating Temperature | -40C to +85C | — |
| Minimum Differential Output Voltage | 2.5 V into 54 ohm load | — |
| Bus-Pin ESD Protection (HBM) | 16 kV | — |
| Unit Load | 1/8 (up to 256 nodes) | — |
| Failsafe | Open, short, and idle-bus | — |
| Standards Compliance | ANSI TIA/EIA-485-A, ISO 8482E | — |
| Package | 8-pin SOIC (D) | 8-pin SOIC |
| Mounting Type | Surface Mount | Surface mount |
| MSL Level | 1 (unlimited) | — |
| RoHS Status | Compliant | [DATA_NEEDED: RoHS compliance status] |
| Product Type | — | 3.3 V half-duplex RS-485 transceiver |
| Supply Voltage Range | — | 3 V to 3.6 V |
| Nominal Supply Voltage | — | 3.3 V |
| Maximum Signaling Rate | — | 50 Mbps |
| Driver Count | — | 1 |
| Receiver Count | — | 1 |
| Duplex Mode | — | Half-duplex |
| Bus Standard | — | RS-485 |
| Operating Temperature Range | — | -40°C to +125°C |
| ESD Protection | — | Human Body Model and IEC Contact Discharge on bus pins |
| IEC Contact Discharge Protection | — | ±12 kV |
| Fault Protection Voltage | — | -13 V to +16.5 V |
| REACH Status | — | [DATA_NEEDED: REACH compliance status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |