SN65HVD06D vs SN65HVD78D Comparación
Comparación detallada lado a lado de SN65HVD06D por Texas Instruments y SN65HVD78D por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Texas Instruments
SN65HVD06D - High-Output RS-485 Transceiver, 8-SOIC | Texas Instruments (Tape & Reel)
SN65HVD06D ✓ Activo
Comparación de especificaciones
| Parámetro | SN65HVD06D | SN65HVD78D |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoría | Interface ICs | USB Interface ICs |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | — |
| Precio unitario (USD) | $0,74 | — |
| Función | Transceiver | — |
| Protocol | RS422, RS485 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half | — |
| Velocidad de datos | 10 Mbps | — |
| Receiver Hysteresis | [DATA_NEEDED: receiver hysteresis mV] | — |
| Tensión de alimentación | 4.5 V to 5.5 V | — |
| Temperatura de funcionamiento | -40C to +85C | — |
| Minimum Differential Output Voltage | 2.5 V into 54 ohm load | — |
| Bus-Pin ESD Protection (HBM) | 16 kV | — |
| Unit Load | 1/8 (up to 256 nodes) | — |
| Failsafe | Open, short, and idle-bus | — |
| Standards Compliance | ANSI TIA/EIA-485-A, ISO 8482E | — |
| Encapsulado | 8-pin SOIC (D) | 8-pin SOIC |
| Tipo de montaje | Surface Mount | Surface mount |
| Nivel MSL | 1 (unlimited) | — |
| Estado RoHS | Compliant | [DATA_NEEDED: RoHS compliance status] |
| Product Type | — | 3.3 V half-duplex RS-485 transceiver |
| Supply Voltage Range | — | 3 V to 3.6 V |
| Nominal Supply Voltage | — | 3.3 V |
| Maximum Signaling Rate | — | 50 Mbps |
| Driver Count | — | 1 |
| Receiver Count | — | 1 |
| Duplex Mode | — | Half-duplex |
| Bus Standard | — | RS-485 |
| Rango de temperatura de funcionamiento | — | -40°C to +125°C |
| ESD Protection | — | Human Body Model and IEC Contact Discharge on bus pins |
| IEC Contact Discharge Protection | — | ±12 kV |
| Fault Protection Voltage | — | -13 V to +16.5 V |
| REACH Status | — | [DATA_NEEDED: REACH compliance status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |