SN65HVD06D vs SN65HVD78D Vergleich
Detaillierter Direktvergleich von SN65HVD06D von Texas Instruments und SN65HVD78D von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
SN65HVD06D - High-Output RS-485 Transceiver, 8-SOIC | Texas Instruments (Tape & Reel)
SN65HVD06D ✓ Aktiv
Spezifikationsvergleich
| Parameter | SN65HVD06D | SN65HVD78D |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Interface ICs | USB Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | — |
| Stückpreis (USD) | $0,74 | — |
| Funktion | Transceiver | — |
| Protocol | RS422, RS485 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half | — |
| Datenrate | 10 Mbps | — |
| Receiver Hysteresis | [DATA_NEEDED: receiver hysteresis mV] | — |
| Versorgungsspannung | 4.5 V to 5.5 V | — |
| Betriebstemperatur | -40C to +85C | — |
| Minimum Differential Output Voltage | 2.5 V into 54 ohm load | — |
| Bus-Pin ESD Protection (HBM) | 16 kV | — |
| Unit Load | 1/8 (up to 256 nodes) | — |
| Failsafe | Open, short, and idle-bus | — |
| Standards Compliance | ANSI TIA/EIA-485-A, ISO 8482E | — |
| Gehäuse | 8-pin SOIC (D) | 8-pin SOIC |
| Montageart | Surface Mount | Surface mount |
| MSL-Level | 1 (unlimited) | — |
| RoHS-Status | Compliant | [DATA_NEEDED: RoHS compliance status] |
| Product Type | — | 3.3 V half-duplex RS-485 transceiver |
| Supply Voltage Range | — | 3 V to 3.6 V |
| Nominal Supply Voltage | — | 3.3 V |
| Maximum Signaling Rate | — | 50 Mbps |
| Driver Count | — | 1 |
| Receiver Count | — | 1 |
| Duplex Mode | — | Half-duplex |
| Bus Standard | — | RS-485 |
| Betriebstemperaturbereich | — | -40°C to +125°C |
| ESD Protection | — | Human Body Model and IEC Contact Discharge on bus pins |
| IEC Contact Discharge Protection | — | ±12 kV |
| Fault Protection Voltage | — | -13 V to +16.5 V |
| REACH Status | — | [DATA_NEEDED: REACH compliance status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |