SN65HVD230QDRQ1 vs SN65HVD234DR Comparison
Detailed side-by-side comparison of SN65HVD230QDRQ1 by Texas Instruments and SN65HVD234DR by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
SN65HVD230QDRQ1 - 3.3V CAN Transceiver AEC-Q100 | Texas Instruments
SN65HVD230QDRQ1 ✓ ActiveTexas Instruments
SN65HVD234DR - 3.3V CAN Transceiver 1Mbps w/ Sleep | Texas Instruments
SN65HVD234DR ✓ ActiveSpecification Comparison
| Parameter | SN65HVD230QDRQ1 | SN65HVD234DR |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Interface ICs | Interface ICs |
| Lifecycle Status | Active | Active |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $1.11 | $1.30 |
| Transceiver Type | CAN (Half-duplex, 1 driver / 1 receiver) | — |
| Data Rate | Up to 1 Mbps | — |
| Supply Voltage | 3.3 V | — |
| Standby Mode Current | 370 uA (typical) | — |
| Bus Pin ESD Protection | Exceeds 15 kV HBM | — |
| Device ESD Rating | Exceeds 2000 V per MIL-STD-883 | — |
| Protocol Compatibility | ISO 11898-2 High Speed CAN Physical Layer | — |
| Standby Mode | Yes (RS pin controlled) | — |
| Dominant Timeout | Yes | — |
| Slew Rate Control | Yes (RS pin) | — |
| Unpowered Node Behavior | Does not disturb the bus | — |
| Operating Temperature Range | -40C to +125C | -40C to +125C |
| AEC-Q100 Qualification | Qualified (Automotive Catalog) | — |
| Package | 8-SOIC (D), 3.90 mm width | SOIC-8 (D) |
| Mounting Type | Surface Mount | Surface Mount |
| Packaging | Tape & Reel (DR) | — |
| Product Type | — | CAN Bus Transceiver |
| Protocol | — | ISO 11898-1 CAN 2.0A/B |
| Supply Voltage (VCC) | — | 3.0 V to 3.6 V |
| Logic Supply Voltage (VIO) | — | Not required (3.3V logic) |
| Maximum Signaling Rate | — | 1 Mbps |
| Number of Drivers/Receivers | — | 1/1 |
| Bus Fault Protection | — | +/-36 V |
| ESD Protection (Bus Pins, HBM) | — | >16 kV |
| Common-Mode Input Range | — | +/-12 V (extended) |
| Maximum Nodes Supported | — | 120 |
| I/O Logic Level | — | LVTTL, 5V-tolerant |
| Sleep Mode Supply Current | — | 0.05 uA (typical) |
| Standby Mode Supply Current | — | 370 uA (typical) |
| RoHS Status | — | Compliant |
| Modes of Operation (RS Pin) | — | High-speed, Slope Control, Low-power Standby |
| Dominant Time-Out Protection | — | Yes |
| Thermal Shutdown | — | Yes |