SN65HVD230QDRQ1 vs SN65HVD234DR Comparaison
Comparaison détaillée côte à côte de SN65HVD230QDRQ1 par Texas Instruments et SN65HVD234DR par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
SN65HVD230QDRQ1 - 3.3V CAN Transceiver AEC-Q100 | Texas Instruments
SN65HVD230QDRQ1 ✓ ActifTexas Instruments
SN65HVD234DR - 3.3V CAN Transceiver 1Mbps w/ Sleep | Texas Instruments
SN65HVD234DR ✓ ActifComparaison des spécifications
| Paramètre | SN65HVD230QDRQ1 | SN65HVD234DR |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $1,11 | $1,30 |
| Transceiver Type | CAN (Half-duplex, 1 driver / 1 receiver) | — |
| Débit de données | Up to 1 Mbps | — |
| Tension d'alimentation | 3.3 V | — |
| Standby Mode Current | 370 uA (typical) | — |
| Bus Pin ESD Protection | Exceeds 15 kV HBM | — |
| Device ESD Rating | Exceeds 2000 V per MIL-STD-883 | — |
| Protocol Compatibility | ISO 11898-2 High Speed CAN Physical Layer | — |
| Standby Mode | Yes (RS pin controlled) | — |
| Dominant Timeout | Yes | — |
| Slew Rate Control | Yes (RS pin) | — |
| Unpowered Node Behavior | Does not disturb the bus | — |
| Plage de température de fonctionnement | -40C to +125C | -40C to +125C |
| AEC-Q100 Qualification | Qualified (Automotive Catalog) | — |
| Boîtier | 8-SOIC (D), 3.90 mm width | SOIC-8 (D) |
| Type de montage | Surface Mount | Surface Mount |
| Packaging | Tape & Reel (DR) | — |
| Product Type | — | CAN Bus Transceiver |
| Protocol | — | ISO 11898-1 CAN 2.0A/B |
| Supply Voltage (VCC) | — | 3.0 V to 3.6 V |
| Logic Supply Voltage (VIO) | — | Not required (3.3V logic) |
| Maximum Signaling Rate | — | 1 Mbps |
| Number of Drivers/Receivers | — | 1/1 |
| Bus Fault Protection | — | +/-36 V |
| ESD Protection (Bus Pins, HBM) | — | >16 kV |
| Common-Mode Input Range | — | +/-12 V (extended) |
| Maximum Nodes Supported | — | 120 |
| I/O Logic Level | — | LVTTL, 5V-tolerant |
| Sleep Mode Supply Current | — | 0.05 uA (typical) |
| Standby Mode Supply Current | — | 370 uA (typical) |
| Statut RoHS | — | Compliant |
| Modes of Operation (RS Pin) | — | High-speed, Slope Control, Low-power Standby |
| Dominant Time-Out Protection | — | Yes |
| Arrêt thermique | — | Yes |