SN65HVD3082EDR vs DS90C402M Comparison
Detailed side-by-side comparison of SN65HVD3082EDR by Texas Instruments and DS90C402M by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
SN65HVD3082EDR - 200kbps Low-Power RS-485 | Texas Instruments
SN65HVD3082EDR ✓ ActiveSpecification Comparison
| Parameter | SN65HVD3082EDR | DS90C402M |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Interface ICs | Interface ICs |
| Lifecycle Status | Active | Active |
| Product Type | Half-duplex RS-485 transceiver | — |
| Number of Drivers | 1 | — |
| Number of Receivers | 1 | — |
| Signaling Rate | Up to 200 kbps | — |
| Supply Voltage | 4.5 V to 5.5 V | — |
| Active Mode Quiescent Current | 0.3 mA | — |
| Shutdown Mode Current | 1 nA | — |
| Bus Unit Load | 1/8 unit load | — |
| Maximum Bus Nodes | Up to 256 nodes | — |
| Bus-Pin ESD Protection | Up to 15 kV | — |
| Standard Compliance | TIA/EIA-485A | — |
| Duplex Mode | Half-duplex | — |
| Package | 8-pin SOIC | 8-lead SOIC |
| Mounting Type | Surface mount | Surface mount |
| Operating Temperature | [DATA_NEEDED: operating temperature range] | — |
| RoHS Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| Device Type | — | Dual LVDS receiver |
| Receiver Configuration | — | 2 receivers |
| Input Threshold Sensitivity | — | ±100 mV |
| Common-Mode Noise Protection | — | Supported |
| Data-Rate Optimization | — | High data rate |
| Power Optimization | — | Low power |
| Interface Pairing | — | DS90C401 companion device |
| Topology | — | Dual high-speed point-to-point interface |
| Package Family | — | SOIC surface-mount package family |
| Number of Pins | — | 8 |
| Operating Supply Voltage | — | [DATA_NEEDED: operating supply voltage] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Maximum Data Rate | — | [DATA_NEEDED: maximum data rate] |
| Supply Current | — | [DATA_NEEDED: supply current] |
| Operating Temperature Range | — | [DATA_NEEDED: operating temperature range] |
| Differential Input Termination | — | [DATA_NEEDED: input termination requirement] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |
| MSL | — | [DATA_NEEDED: moisture sensitivity level] |