SN65HVD3082EDR vs DS90C402M Comparación
Comparación detallada lado a lado de SN65HVD3082EDR por Texas Instruments y DS90C402M por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Texas Instruments
SN65HVD3082EDR - 200kbps Low-Power RS-485 | Texas Instruments
SN65HVD3082EDR ✓ ActivoComparación de especificaciones
| Parámetro | SN65HVD3082EDR | DS90C402M |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoría | Interface ICs | Interface ICs |
| Estado del ciclo de vida | Activo | Activo |
| Product Type | Half-duplex RS-485 transceiver | — |
| Number of Drivers | 1 | — |
| Number of Receivers | 1 | — |
| Signaling Rate | Up to 200 kbps | — |
| Tensión de alimentación | 4.5 V to 5.5 V | — |
| Active Mode Quiescent Current | 0.3 mA | — |
| Shutdown Mode Current | 1 nA | — |
| Bus Unit Load | 1/8 unit load | — |
| Maximum Bus Nodes | Up to 256 nodes | — |
| Bus-Pin ESD Protection | Up to 15 kV | — |
| Standard Compliance | TIA/EIA-485A | — |
| Duplex Mode | Half-duplex | — |
| Encapsulado | 8-pin SOIC | 8-lead SOIC |
| Tipo de montaje | Surface mount | Surface mount |
| Temperatura de funcionamiento | [DATA_NEEDED: operating temperature range] | — |
| Estado RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| Device Type | — | Dual LVDS receiver |
| Receiver Configuration | — | 2 receivers |
| Input Threshold Sensitivity | — | ±100 mV |
| Common-Mode Noise Protection | — | Supported |
| Data-Rate Optimization | — | High data rate |
| Power Optimization | — | Low power |
| Interface Pairing | — | DS90C401 companion device |
| Topología | — | Dual high-speed point-to-point interface |
| Package Family | — | SOIC surface-mount package family |
| Número de pines | — | 8 |
| Tensión de alimentación de funcionamiento | — | [DATA_NEEDED: operating supply voltage] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Maximum Data Rate | — | [DATA_NEEDED: maximum data rate] |
| Corriente de alimentación | — | [DATA_NEEDED: supply current] |
| Rango de temperatura de funcionamiento | — | [DATA_NEEDED: operating temperature range] |
| Differential Input Termination | — | [DATA_NEEDED: input termination requirement] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |
| MSL | — | [DATA_NEEDED: moisture sensitivity level] |