SN65HVD3082EDR vs DS90C402M 比較
詳細な並列比較: SN65HVD3082EDR メーカー: Texas Instruments および DS90C402M メーカー: Texas Instruments。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
Texas Instruments
SN65HVD3082EDR - 200kbps Low-Power RS-485 | Texas Instruments
SN65HVD3082EDR ✓ 生産中仕様比較
| パラメータ | SN65HVD3082EDR | DS90C402M |
|---|---|---|
| ブランド | Texas Instruments | Texas Instruments |
| カテゴリ | Interface ICs | Interface ICs |
| ライフサイクル状態 | 有効 | 有効 |
| Product Type | Half-duplex RS-485 transceiver | — |
| Number of Drivers | 1 | — |
| Number of Receivers | 1 | — |
| Signaling Rate | Up to 200 kbps | — |
| 電源電圧 | 4.5 V to 5.5 V | — |
| Active Mode Quiescent Current | 0.3 mA | — |
| Shutdown Mode Current | 1 nA | — |
| Bus Unit Load | 1/8 unit load | — |
| Maximum Bus Nodes | Up to 256 nodes | — |
| Bus-Pin ESD Protection | Up to 15 kV | — |
| Standard Compliance | TIA/EIA-485A | — |
| Duplex Mode | Half-duplex | — |
| パッケージ | 8-pin SOIC | 8-lead SOIC |
| 実装タイプ | Surface mount | Surface mount |
| 動作温度 | [DATA_NEEDED: operating temperature range] | — |
| RoHS ステータス | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| Device Type | — | Dual LVDS receiver |
| Receiver Configuration | — | 2 receivers |
| Input Threshold Sensitivity | — | ±100 mV |
| Common-Mode Noise Protection | — | Supported |
| Data-Rate Optimization | — | High data rate |
| Power Optimization | — | Low power |
| Interface Pairing | — | DS90C401 companion device |
| トポロジー | — | Dual high-speed point-to-point interface |
| Package Family | — | SOIC surface-mount package family |
| ピン数 | — | 8 |
| 動作電源電圧 | — | [DATA_NEEDED: operating supply voltage] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Maximum Data Rate | — | [DATA_NEEDED: maximum data rate] |
| 電源電流 | — | [DATA_NEEDED: supply current] |
| 動作温度範囲 | — | [DATA_NEEDED: operating temperature range] |
| Differential Input Termination | — | [DATA_NEEDED: input termination requirement] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |
| MSL | — | [DATA_NEEDED: moisture sensitivity level] |