SN65HVD3082EDR vs DS90C402M Vergleich
Detaillierter Direktvergleich von SN65HVD3082EDR von Texas Instruments und DS90C402M von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
SN65HVD3082EDR - 200kbps Low-Power RS-485 | Texas Instruments
SN65HVD3082EDR ✓ AktivSpezifikationsvergleich
| Parameter | SN65HVD3082EDR | DS90C402M |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Product Type | Half-duplex RS-485 transceiver | — |
| Number of Drivers | 1 | — |
| Number of Receivers | 1 | — |
| Signaling Rate | Up to 200 kbps | — |
| Versorgungsspannung | 4.5 V to 5.5 V | — |
| Active Mode Quiescent Current | 0.3 mA | — |
| Shutdown Mode Current | 1 nA | — |
| Bus Unit Load | 1/8 unit load | — |
| Maximum Bus Nodes | Up to 256 nodes | — |
| Bus-Pin ESD Protection | Up to 15 kV | — |
| Standard Compliance | TIA/EIA-485A | — |
| Duplex Mode | Half-duplex | — |
| Gehäuse | 8-pin SOIC | 8-lead SOIC |
| Montageart | Surface mount | Surface mount |
| Betriebstemperatur | [DATA_NEEDED: operating temperature range] | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| Device Type | — | Dual LVDS receiver |
| Receiver Configuration | — | 2 receivers |
| Input Threshold Sensitivity | — | ±100 mV |
| Common-Mode Noise Protection | — | Supported |
| Data-Rate Optimization | — | High data rate |
| Power Optimization | — | Low power |
| Interface Pairing | — | DS90C401 companion device |
| Topologie | — | Dual high-speed point-to-point interface |
| Package Family | — | SOIC surface-mount package family |
| Anzahl der Pins | — | 8 |
| Betriebsversorgungsspannung | — | [DATA_NEEDED: operating supply voltage] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Maximum Data Rate | — | [DATA_NEEDED: maximum data rate] |
| Versorgungsstrom | — | [DATA_NEEDED: supply current] |
| Betriebstemperaturbereich | — | [DATA_NEEDED: operating temperature range] |
| Differential Input Termination | — | [DATA_NEEDED: input termination requirement] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |
| MSL | — | [DATA_NEEDED: moisture sensitivity level] |