SN65HVD50D vs SN65HVD53D Comparison
Detailed side-by-side comparison of SN65HVD50D by Texas Instruments and SN65HVD53D by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
SN65HVD50D - 25Mbps RS-485/RS-422 Transceiver | Texas Instruments
SN65HVD50D ✓ ActiveTexas Instruments
SN65HVD53D - High-Output Full-Duplex RS-485 Transceiver | Texas Instruments
SN65HVD53D ✓ ActiveSpecification Comparison
| Parameter | SN65HVD50D | SN65HVD53D |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Interface ICs | Interface ICs |
| Lifecycle Status | Active | Active |
| Product Type | High-output full-duplex RS-485 driver and receiver | — |
| Supported Standards | RS-485 and RS-422 | — |
| Supply Voltage Range | 4.5 V to 5.5 V | [DATA_NEEDED: supply voltage range] |
| Maximum Data Rate | 25 Mbps | — |
| Number of Drivers | 1 | — |
| Number of Receivers | 1 | — |
| Receiver Hysteresis | 50 mV | — |
| Unit Load | 1/8 unit load | — |
| Maximum Bus Nodes | 256 nodes | — |
| Bus-Pin ESD Protection | Exceeds 15 kV HBM | — |
| Standby Current | 1 µA | 1 uA (both driver and receiver disabled) |
| Driver Transition-Time Options | 1 Mbps, 5 Mbps, and 25 Mbps | — |
| Operating Temperature Range | -40 °C to +85 °C | -40 C to +85 C |
| Package | 8-pin SOIC (D), 0.154 inch body width, 3.90 mm width | SOIC (D), 14 pins, 3.90 mm width, 0.154 inch pitch |
| Mounting Type | Surface mount | Surface mount |
| RoHS Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Halogen-Free Status | [DATA_NEEDED: halogen-free status] | — |
| Conflict Minerals | [DATA_NEEDED: conflict-minerals status] | — |
| Manufacturer Product Description | High Output Full-Duplex RS 485 Drivers and Receivers | — |
| Device Type | — | Full-duplex RS-485 / RS-422 transceiver with enables |
| Number of Drivers / Receivers | — | 1 / 1 |
| Driver Enable Polarity | — | Active-high |
| Receiver Enable Polarity | — | Active-low |
| Unit Load Option | — | 1/8 unit-load option available (up to 256 nodes on the bus) |
| Maximum Nodes on Bus | — | 256 nodes |
| Bus Pin ESD Protection | — | Exceeds 15 kV HBM |
| Driver Output Transition Time Options | — | 1 Mbps, 5 Mbps and 25 Mbps signaling rates |
| Receiver Output | — | Glitch-free |
| Standards Supported | — | RS-485, RS-422 |
| Maximum Data Rate (this device) | — | [DATA_NEEDED: maximum data rate for SN65HVD53D] |
| Driver Output Current | — | [DATA_NEEDED: high-output driver current] |
| Receiver Sensitivity | — | [DATA_NEEDED: receiver input sensitivity] |