SN65HVD50D vs SN65HVD53D Comparaison
Comparaison détaillée côte à côte de SN65HVD50D par Texas Instruments et SN65HVD53D par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
SN65HVD50D - 25Mbps RS-485/RS-422 Transceiver | Texas Instruments
SN65HVD50D ✓ ActifTexas Instruments
SN65HVD53D - High-Output Full-Duplex RS-485 Transceiver | Texas Instruments
SN65HVD53D ✓ ActifComparaison des spécifications
| Paramètre | SN65HVD50D | SN65HVD53D |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | High-output full-duplex RS-485 driver and receiver | — |
| Supported Standards | RS-485 and RS-422 | — |
| Supply Voltage Range | 4.5 V to 5.5 V | [DATA_NEEDED: supply voltage range] |
| Maximum Data Rate | 25 Mbps | — |
| Number of Drivers | 1 | — |
| Number of Receivers | 1 | — |
| Receiver Hysteresis | 50 mV | — |
| Unit Load | 1/8 unit load | — |
| Maximum Bus Nodes | 256 nodes | — |
| Bus-Pin ESD Protection | Exceeds 15 kV HBM | — |
| Standby Current | 1 µA | 1 uA (both driver and receiver disabled) |
| Driver Transition-Time Options | 1 Mbps, 5 Mbps, and 25 Mbps | — |
| Plage de température de fonctionnement | -40 °C to +85 °C | -40 C to +85 C |
| Boîtier | 8-pin SOIC (D), 0.154 inch body width, 3.90 mm width | SOIC (D), 14 pins, 3.90 mm width, 0.154 inch pitch |
| Type de montage | Surface mount | Surface mount |
| Statut RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Halogen-Free Status | [DATA_NEEDED: halogen-free status] | — |
| Conflict Minerals | [DATA_NEEDED: conflict-minerals status] | — |
| Manufacturer Product Description | High Output Full-Duplex RS 485 Drivers and Receivers | — |
| Device Type | — | Full-duplex RS-485 / RS-422 transceiver with enables |
| Number of Drivers / Receivers | — | 1 / 1 |
| Driver Enable Polarity | — | Active-high |
| Receiver Enable Polarity | — | Active-low |
| Unit Load Option | — | 1/8 unit-load option available (up to 256 nodes on the bus) |
| Maximum Nodes on Bus | — | 256 nodes |
| Bus Pin ESD Protection | — | Exceeds 15 kV HBM |
| Driver Output Transition Time Options | — | 1 Mbps, 5 Mbps and 25 Mbps signaling rates |
| Receiver Output | — | Glitch-free |
| Standards Supported | — | RS-485, RS-422 |
| Maximum Data Rate (this device) | — | [DATA_NEEDED: maximum data rate for SN65HVD53D] |
| Driver Output Current | — | [DATA_NEEDED: high-output driver current] |
| Receiver Sensitivity | — | [DATA_NEEDED: receiver input sensitivity] |