SN65HVD50D vs SN65HVD53D Сравнение
Подробное сравнение бок о бок SN65HVD50D от Texas Instruments и SN65HVD53D от Texas Instruments. Сравните ключевые характеристики, электрические параметры, упаковку, статус жизненного цикла, цены и наличие, чтобы выбрать лучший компонент для ваших требований.
Texas Instruments
SN65HVD50D - 25Mbps RS-485/RS-422 Transceiver | Texas Instruments
SN65HVD50D ✓ АктивенTexas Instruments
SN65HVD53D - High-Output Full-Duplex RS-485 Transceiver | Texas Instruments
SN65HVD53D ✓ АктивенСравнение характеристик
| Параметр | SN65HVD50D | SN65HVD53D |
|---|---|---|
| Бренд | Texas Instruments | Texas Instruments |
| Категория | Interface ICs | Interface ICs |
| Статус жизненного цикла | Активен | Активен |
| Product Type | High-output full-duplex RS-485 driver and receiver | — |
| Supported Standards | RS-485 and RS-422 | — |
| Supply Voltage Range | 4.5 V to 5.5 V | [DATA_NEEDED: supply voltage range] |
| Maximum Data Rate | 25 Mbps | — |
| Number of Drivers | 1 | — |
| Number of Receivers | 1 | — |
| Receiver Hysteresis | 50 mV | — |
| Unit Load | 1/8 unit load | — |
| Maximum Bus Nodes | 256 nodes | — |
| Bus-Pin ESD Protection | Exceeds 15 kV HBM | — |
| Standby Current | 1 µA | 1 uA (both driver and receiver disabled) |
| Driver Transition-Time Options | 1 Mbps, 5 Mbps, and 25 Mbps | — |
| Диапазон рабочих температур | -40 °C to +85 °C | -40 C to +85 C |
| Корпус | 8-pin SOIC (D), 0.154 inch body width, 3.90 mm width | SOIC (D), 14 pins, 3.90 mm width, 0.154 inch pitch |
| Тип монтажа | Surface mount | Surface mount |
| Статус RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Halogen-Free Status | [DATA_NEEDED: halogen-free status] | — |
| Conflict Minerals | [DATA_NEEDED: conflict-minerals status] | — |
| Manufacturer Product Description | High Output Full-Duplex RS 485 Drivers and Receivers | — |
| Device Type | — | Full-duplex RS-485 / RS-422 transceiver with enables |
| Number of Drivers / Receivers | — | 1 / 1 |
| Driver Enable Polarity | — | Active-high |
| Receiver Enable Polarity | — | Active-low |
| Unit Load Option | — | 1/8 unit-load option available (up to 256 nodes on the bus) |
| Maximum Nodes on Bus | — | 256 nodes |
| Bus Pin ESD Protection | — | Exceeds 15 kV HBM |
| Driver Output Transition Time Options | — | 1 Mbps, 5 Mbps and 25 Mbps signaling rates |
| Receiver Output | — | Glitch-free |
| Standards Supported | — | RS-485, RS-422 |
| Maximum Data Rate (this device) | — | [DATA_NEEDED: maximum data rate for SN65HVD53D] |
| Driver Output Current | — | [DATA_NEEDED: high-output driver current] |
| Receiver Sensitivity | — | [DATA_NEEDED: receiver input sensitivity] |