SN65HVD50D vs SN65HVD53D So sánh
So sánh chi tiết song song của SN65HVD50D bằng Texas Instruments và SN65HVD53D bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.
Texas Instruments
SN65HVD50D - 25Mbps RS-485/RS-422 Transceiver | Texas Instruments
SN65HVD50D ✓ Hoạt độngTexas Instruments
SN65HVD53D - High-Output Full-Duplex RS-485 Transceiver | Texas Instruments
SN65HVD53D ✓ Hoạt độngSo sánh thông số kỹ thuật
| Tham số | SN65HVD50D | SN65HVD53D |
|---|---|---|
| Thương hiệu | Texas Instruments | Texas Instruments |
| Danh mục | Interface ICs | Interface ICs |
| Trạng thái vòng đời | Hoạt động | Hoạt động |
| Product Type | High-output full-duplex RS-485 driver and receiver | — |
| Supported Standards | RS-485 and RS-422 | — |
| Supply Voltage Range | 4.5 V to 5.5 V | [DATA_NEEDED: supply voltage range] |
| Maximum Data Rate | 25 Mbps | — |
| Number of Drivers | 1 | — |
| Number of Receivers | 1 | — |
| Receiver Hysteresis | 50 mV | — |
| Unit Load | 1/8 unit load | — |
| Maximum Bus Nodes | 256 nodes | — |
| Bus-Pin ESD Protection | Exceeds 15 kV HBM | — |
| Standby Current | 1 µA | 1 uA (both driver and receiver disabled) |
| Driver Transition-Time Options | 1 Mbps, 5 Mbps, and 25 Mbps | — |
| Khoảng nhiệt độ hoạt động | -40 °C to +85 °C | -40 C to +85 C |
| Hộp | 8-pin SOIC (D), 0.154 inch body width, 3.90 mm width | SOIC (D), 14 pins, 3.90 mm width, 0.154 inch pitch |
| Kiểu lắp đặt | Surface mount | Surface mount |
| Trạng thái RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Halogen-Free Status | [DATA_NEEDED: halogen-free status] | — |
| Conflict Minerals | [DATA_NEEDED: conflict-minerals status] | — |
| Manufacturer Product Description | High Output Full-Duplex RS 485 Drivers and Receivers | — |
| Device Type | — | Full-duplex RS-485 / RS-422 transceiver with enables |
| Number of Drivers / Receivers | — | 1 / 1 |
| Driver Enable Polarity | — | Active-high |
| Receiver Enable Polarity | — | Active-low |
| Unit Load Option | — | 1/8 unit-load option available (up to 256 nodes on the bus) |
| Maximum Nodes on Bus | — | 256 nodes |
| Bus Pin ESD Protection | — | Exceeds 15 kV HBM |
| Driver Output Transition Time Options | — | 1 Mbps, 5 Mbps and 25 Mbps signaling rates |
| Receiver Output | — | Glitch-free |
| Standards Supported | — | RS-485, RS-422 |
| Maximum Data Rate (this device) | — | [DATA_NEEDED: maximum data rate for SN65HVD53D] |
| Driver Output Current | — | [DATA_NEEDED: high-output driver current] |
| Receiver Sensitivity | — | [DATA_NEEDED: receiver input sensitivity] |