SN65HVD76D vs SN65HVD70DGSR Comparison
Detailed side-by-side comparison of SN65HVD76D by Texas Instruments and SN65HVD70DGSR by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
SN65HVD70DGSR - 3.3V Full-Duplex RS-485 400kbps Transceiver, 10-VSSOP | Texas Instruments
SN65HVD70DGSR ✓ ActiveSpecification Comparison
| Parameter | SN65HVD76D | SN65HVD70DGSR |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Interface ICs | Interface ICs |
| Lifecycle Status | Active | Active |
| Product Type | Full-duplex RS-485 transceiver | RS-485 / RS-422 Transceiver |
| Supply Voltage | 3.3 V | — |
| Supply Voltage Range | 3 V to 3.6 V | — |
| Maximum Data Rate | 50 Mbps | — |
| Number of Drivers/Receivers | 1/1 | 1/1 |
| Duplex Mode | Full-duplex | — |
| Supported Protocols | RS-485 and RS-422 | — |
| Receiver Hysteresis | 70 mV | 50 mV (typical) |
| Receiver Unit Load | 1/8 unit load | — |
| Maximum Bus Nodes | 256 nodes | — |
| IEC Contact Discharge Protection | Greater than 12 kV | — |
| Human Body Model Protection | Greater than 30 kV | — |
| IEC Fast Transient Burst Protection | Greater than 4 kV | — |
| Low Standby Current | Less than 5 uA with driver and receiver disabled | — |
| Driver Enable | Active high | Active-high |
| Receiver Enable | Active low | Active-low |
| Operating Temperature Range | -40 C to 125 C | — |
| Package | 14-pin SOIC (D) | 10-pin VSSOP (DGS) with PowerPAD |
| Mounting Type | Surface mount | Surface Mount |
| RoHS Status | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Protocol | — | RS-422, RS-485 |
| Duplex | — | Full |
| Supply Voltage (VCC) | — | 3.0 V to 3.6 V |
| Data Rate | — | Up to 400 kbps |
| IEC ESD Protection (Contact) | — | ±12 kV (IEC 61000-4-2) |
| HBM ESD Protection (Bus pins) | — | ±30 kV (HBM) |
| Common-Mode Range | — | -7 V to +12 V |
| Unit Load | — | 1/8 unit load (up to 256 nodes) |
| Standby Current | — | < 5 µA (both disabled) |
| Operating Temperature | — | -40 °C to +125 °C |