SN65HVD76D vs SN65HVD70DGSR Comparación
Comparación detallada lado a lado de SN65HVD76D por Texas Instruments y SN65HVD70DGSR por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Texas Instruments
SN65HVD70DGSR - 3.3V Full-Duplex RS-485 400kbps Transceiver, 10-VSSOP | Texas Instruments
SN65HVD70DGSR ✓ ActivoComparación de especificaciones
| Parámetro | SN65HVD76D | SN65HVD70DGSR |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoría | Interface ICs | Interface ICs |
| Estado del ciclo de vida | Activo | Activo |
| Product Type | Full-duplex RS-485 transceiver | RS-485 / RS-422 Transceiver |
| Tensión de alimentación | 3.3 V | — |
| Supply Voltage Range | 3 V to 3.6 V | — |
| Maximum Data Rate | 50 Mbps | — |
| Number of Drivers/Receivers | 1/1 | 1/1 |
| Duplex Mode | Full-duplex | — |
| Supported Protocols | RS-485 and RS-422 | — |
| Receiver Hysteresis | 70 mV | 50 mV (typical) |
| Receiver Unit Load | 1/8 unit load | — |
| Maximum Bus Nodes | 256 nodes | — |
| IEC Contact Discharge Protection | Greater than 12 kV | — |
| Human Body Model Protection | Greater than 30 kV | — |
| IEC Fast Transient Burst Protection | Greater than 4 kV | — |
| Low Standby Current | Less than 5 uA with driver and receiver disabled | — |
| Driver Enable | Active high | Active-high |
| Receiver Enable | Active low | Active-low |
| Rango de temperatura de funcionamiento | -40 C to 125 C | — |
| Encapsulado | 14-pin SOIC (D) | 10-pin VSSOP (DGS) with PowerPAD |
| Tipo de montaje | Surface mount | Surface Mount |
| Estado RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Protocol | — | RS-422, RS-485 |
| Duplex | — | Full |
| Supply Voltage (VCC) | — | 3.0 V to 3.6 V |
| Velocidad de datos | — | Up to 400 kbps |
| IEC ESD Protection (Contact) | — | ±12 kV (IEC 61000-4-2) |
| HBM ESD Protection (Bus pins) | — | ±30 kV (HBM) |
| Common-Mode Range | — | -7 V to +12 V |
| Unit Load | — | 1/8 unit load (up to 256 nodes) |
| Standby Current | — | < 5 µA (both disabled) |
| Temperatura de funcionamiento | — | -40 °C to +125 °C |