SN65HVD76D vs SN65HVD70DGSR Vergleich
Detaillierter Direktvergleich von SN65HVD76D von Texas Instruments und SN65HVD70DGSR von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
SN65HVD70DGSR - 3.3V Full-Duplex RS-485 400kbps Transceiver, 10-VSSOP | Texas Instruments
SN65HVD70DGSR ✓ AktivSpezifikationsvergleich
| Parameter | SN65HVD76D | SN65HVD70DGSR |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Product Type | Full-duplex RS-485 transceiver | RS-485 / RS-422 Transceiver |
| Versorgungsspannung | 3.3 V | — |
| Supply Voltage Range | 3 V to 3.6 V | — |
| Maximum Data Rate | 50 Mbps | — |
| Number of Drivers/Receivers | 1/1 | 1/1 |
| Duplex Mode | Full-duplex | — |
| Supported Protocols | RS-485 and RS-422 | — |
| Receiver Hysteresis | 70 mV | 50 mV (typical) |
| Receiver Unit Load | 1/8 unit load | — |
| Maximum Bus Nodes | 256 nodes | — |
| IEC Contact Discharge Protection | Greater than 12 kV | — |
| Human Body Model Protection | Greater than 30 kV | — |
| IEC Fast Transient Burst Protection | Greater than 4 kV | — |
| Low Standby Current | Less than 5 uA with driver and receiver disabled | — |
| Driver Enable | Active high | Active-high |
| Receiver Enable | Active low | Active-low |
| Betriebstemperaturbereich | -40 C to 125 C | — |
| Gehäuse | 14-pin SOIC (D) | 10-pin VSSOP (DGS) with PowerPAD |
| Montageart | Surface mount | Surface Mount |
| RoHS-Status | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Protocol | — | RS-422, RS-485 |
| Duplex | — | Full |
| Supply Voltage (VCC) | — | 3.0 V to 3.6 V |
| Datenrate | — | Up to 400 kbps |
| IEC ESD Protection (Contact) | — | ±12 kV (IEC 61000-4-2) |
| HBM ESD Protection (Bus pins) | — | ±30 kV (HBM) |
| Common-Mode Range | — | -7 V to +12 V |
| Unit Load | — | 1/8 unit load (up to 256 nodes) |
| Standby Current | — | < 5 µA (both disabled) |
| Betriebstemperatur | — | -40 °C to +125 °C |