SN65HVD76D vs SN65HVD70DGSR Comparaison
Comparaison détaillée côte à côte de SN65HVD76D par Texas Instruments et SN65HVD70DGSR par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
SN65HVD70DGSR - 3.3V Full-Duplex RS-485 400kbps Transceiver, 10-VSSOP | Texas Instruments
SN65HVD70DGSR ✓ ActifComparaison des spécifications
| Paramètre | SN65HVD76D | SN65HVD70DGSR |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | Full-duplex RS-485 transceiver | RS-485 / RS-422 Transceiver |
| Tension d'alimentation | 3.3 V | — |
| Supply Voltage Range | 3 V to 3.6 V | — |
| Maximum Data Rate | 50 Mbps | — |
| Number of Drivers/Receivers | 1/1 | 1/1 |
| Duplex Mode | Full-duplex | — |
| Supported Protocols | RS-485 and RS-422 | — |
| Receiver Hysteresis | 70 mV | 50 mV (typical) |
| Receiver Unit Load | 1/8 unit load | — |
| Maximum Bus Nodes | 256 nodes | — |
| IEC Contact Discharge Protection | Greater than 12 kV | — |
| Human Body Model Protection | Greater than 30 kV | — |
| IEC Fast Transient Burst Protection | Greater than 4 kV | — |
| Low Standby Current | Less than 5 uA with driver and receiver disabled | — |
| Driver Enable | Active high | Active-high |
| Receiver Enable | Active low | Active-low |
| Plage de température de fonctionnement | -40 C to 125 C | — |
| Boîtier | 14-pin SOIC (D) | 10-pin VSSOP (DGS) with PowerPAD |
| Type de montage | Surface mount | Surface Mount |
| Statut RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Protocol | — | RS-422, RS-485 |
| Duplex | — | Full |
| Supply Voltage (VCC) | — | 3.0 V to 3.6 V |
| Débit de données | — | Up to 400 kbps |
| IEC ESD Protection (Contact) | — | ±12 kV (IEC 61000-4-2) |
| HBM ESD Protection (Bus pins) | — | ±30 kV (HBM) |
| Common-Mode Range | — | -7 V to +12 V |
| Unit Load | — | 1/8 unit load (up to 256 nodes) |
| Standby Current | — | < 5 µA (both disabled) |
| Température de fonctionnement | — | -40 °C to +125 °C |