TJA1044T vs SN65HVD230DR Comparison
Detailed side-by-side comparison of TJA1044T by NXP Semiconductors and SN65HVD230DR by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
SN65HVD230DR - 3.3V CAN Transceiver 1Mbps 8-SOIC | Texas Instruments
SN65HVD230DR ✓ ActiveSpecification Comparison
| Parameter | TJA1044T | SN65HVD230DR |
|---|---|---|
| Brand | NXP Semiconductors | Texas Instruments |
| Category | Interface ICs | Interface ICs |
| Lifecycle Status | Active | Active |
| Product Type | High-speed CAN transceiver with standby mode | CAN Bus Transceiver |
| Bus / Protocol | CAN (Controller Area Network), 2-wire differential bus | — |
| Maximum Data Rate | 1 Mbit/s | 1 Mbps |
| Product Family | Mantis high-speed CAN transceiver family | — |
| Transceiver Type | 1/1 transceiver (TXD and RXD), half CANbus | — |
| Supply Voltage | [DATA_NEEDED: VCC operating range] | 3 V to 3.6 V (3.3 V nominal) |
| I/O Reference Voltage (VIO) | [DATA_NEEDED: VIO operating range] | — |
| Sleep Mode Current | Low current consumption in sleep mode (exact value [DATA_NEEDED: sleep current in uA]) | — |
| Standby Control | Dedicated standby (STB) pin | — |
| Package | 8-pin SO (SOIC-8), surface mount | 8-SOIC (D) |
| Mounting Type | Surface Mount | Surface Mount |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 grade] | — |
| Operating Temperature Range | [DATA_NEEDED: temperature range in C] | — |
| ESD / Transient Immunity | [DATA_NEEDED: IEC 61000-4-2 ESD rating] | — |
| Common-Mode Range | [DATA_NEEDED: bus common-mode range in V] | — |
| Termination | External 60 ohm termination at bus ends (application requirement) | — |
| RoHS Status | [DATA_NEEDED: RoHS status] | Compliant |
| Unit Price Reference | $0.2548 as of 2026-10-28 (LCSC listing) | — |
| Distributor Stock Reference | $0.872 unit price as of 2026-10-28 (ADatasheet listing) | — |
| Number of Drivers/Receivers | — | 1/1 |
| Protocol | — | CANbus (ISO 11898-2) |
| Driver/Receiver Configuration | — | Half-Duplex |
| Standby Mode Supply Current | — | 370 uA typical |
| ESD Protection (Bus Pins, HBM) | — | Exceeds 16 kV |
| Maximum Nodes on Bus | — | 120 nodes |
| Receiver Common-Mode Range | — | -2 V to 7 V |
| Operating Temperature | — | -40C to +85C |
| RS Pin Function | — | Slew-rate control via external resistor |