TJA1044T vs SN65HVD230DR तुलना

विस्तृत दोनों ओर की तुलना TJA1044T द्वारा NXP Semiconductors और SN65HVD230DR द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

NXP Semiconductors
TJA1044T TJA1044T - 1 Mbit/s CAN Transceiver with Standby | NXP | SO-8

TJA1044T - 1 Mbit/s CAN Transceiver with Standby | NXP | SO-8

TJA1044T ✓ सक्रिय
Texas Instruments
SN65HVD230DR SN65HVD230DR - 3.3V CAN Transceiver 1Mbps 8-SOIC | Texas Instruments

SN65HVD230DR - 3.3V CAN Transceiver 1Mbps 8-SOIC | Texas Instruments

SN65HVD230DR ✓ सक्रिय

विशेषता तुलना

पैरामीटर TJA1044T SN65HVD230DR
ब्रांड NXP Semiconductors Texas Instruments
श्रेणी Interface ICs Interface ICs
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Product Type High-speed CAN transceiver with standby mode CAN Bus Transceiver
Bus / Protocol CAN (Controller Area Network), 2-wire differential bus —
Maximum Data Rate 1 Mbit/s 1 Mbps
Product Family Mantis high-speed CAN transceiver family —
Transceiver Type 1/1 transceiver (TXD and RXD), half CANbus —
सप्लाई वोल्टेज [DATA_NEEDED: VCC operating range] 3 V to 3.6 V (3.3 V nominal)
I/O Reference Voltage (VIO) [DATA_NEEDED: VIO operating range] —
Sleep Mode Current Low current consumption in sleep mode (exact value [DATA_NEEDED: sleep current in uA]) —
Standby Control Dedicated standby (STB) pin —
पैकेज 8-pin SO (SOIC-8), surface mount 8-SOIC (D)
माउंटिंग प्रकार Surface Mount Surface Mount
Automotive Qualification [DATA_NEEDED: AEC-Q100 grade] —
ऑपरेटिंग तापमान रेंज [DATA_NEEDED: temperature range in C] —
ESD / Transient Immunity [DATA_NEEDED: IEC 61000-4-2 ESD rating] —
Common-Mode Range [DATA_NEEDED: bus common-mode range in V] —
Termination External 60 ohm termination at bus ends (application requirement) —
RoHS स्थिति [DATA_NEEDED: RoHS status] Compliant
Unit Price Reference $0.2548 as of 2026-10-28 (LCSC listing) —
Distributor Stock Reference $0.872 unit price as of 2026-10-28 (ADatasheet listing) —
Number of Drivers/Receivers — 1/1
Protocol — CANbus (ISO 11898-2)
Driver/Receiver Configuration — Half-Duplex
Standby Mode Supply Current — 370 uA typical
ESD Protection (Bus Pins, HBM) — Exceeds 16 kV
Maximum Nodes on Bus — 120 nodes
Receiver Common-Mode Range — -2 V to 7 V
ऑपरेटिंग तापमान — -40C to +85C
RS Pin Function — Slew-rate control via external resistor

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध