TJA1044T vs SN65HVD230DR Comparaison
Comparaison détaillée côte à côte de TJA1044T par NXP Semiconductors et SN65HVD230DR par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
SN65HVD230DR - 3.3V CAN Transceiver 1Mbps 8-SOIC | Texas Instruments
SN65HVD230DR ✓ ActifComparaison des spécifications
| Paramètre | TJA1044T | SN65HVD230DR |
|---|---|---|
| Marque | NXP Semiconductors | Texas Instruments |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | High-speed CAN transceiver with standby mode | CAN Bus Transceiver |
| Bus / Protocol | CAN (Controller Area Network), 2-wire differential bus | — |
| Maximum Data Rate | 1 Mbit/s | 1 Mbps |
| Product Family | Mantis high-speed CAN transceiver family | — |
| Transceiver Type | 1/1 transceiver (TXD and RXD), half CANbus | — |
| Tension d'alimentation | [DATA_NEEDED: VCC operating range] | 3 V to 3.6 V (3.3 V nominal) |
| I/O Reference Voltage (VIO) | [DATA_NEEDED: VIO operating range] | — |
| Sleep Mode Current | Low current consumption in sleep mode (exact value [DATA_NEEDED: sleep current in uA]) | — |
| Standby Control | Dedicated standby (STB) pin | — |
| Boîtier | 8-pin SO (SOIC-8), surface mount | 8-SOIC (D) |
| Type de montage | Surface Mount | Surface Mount |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 grade] | — |
| Plage de température de fonctionnement | [DATA_NEEDED: temperature range in C] | — |
| ESD / Transient Immunity | [DATA_NEEDED: IEC 61000-4-2 ESD rating] | — |
| Common-Mode Range | [DATA_NEEDED: bus common-mode range in V] | — |
| Termination | External 60 ohm termination at bus ends (application requirement) | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| Unit Price Reference | $0.2548 as of 2026-10-28 (LCSC listing) | — |
| Distributor Stock Reference | $0.872 unit price as of 2026-10-28 (ADatasheet listing) | — |
| Number of Drivers/Receivers | — | 1/1 |
| Protocol | — | CANbus (ISO 11898-2) |
| Driver/Receiver Configuration | — | Half-Duplex |
| Standby Mode Supply Current | — | 370 uA typical |
| ESD Protection (Bus Pins, HBM) | — | Exceeds 16 kV |
| Maximum Nodes on Bus | — | 120 nodes |
| Receiver Common-Mode Range | — | -2 V to 7 V |
| Température de fonctionnement | — | -40C to +85C |
| RS Pin Function | — | Slew-rate control via external resistor |