TJA1044T vs SN65HVD230DR Vergleich
Detaillierter Direktvergleich von TJA1044T von NXP Semiconductors und SN65HVD230DR von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
SN65HVD230DR - 3.3V CAN Transceiver 1Mbps 8-SOIC | Texas Instruments
SN65HVD230DR ✓ AktivSpezifikationsvergleich
| Parameter | TJA1044T | SN65HVD230DR |
|---|---|---|
| Marke | NXP Semiconductors | Texas Instruments |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Product Type | High-speed CAN transceiver with standby mode | CAN Bus Transceiver |
| Bus / Protocol | CAN (Controller Area Network), 2-wire differential bus | — |
| Maximum Data Rate | 1 Mbit/s | 1 Mbps |
| Product Family | Mantis high-speed CAN transceiver family | — |
| Transceiver Type | 1/1 transceiver (TXD and RXD), half CANbus | — |
| Versorgungsspannung | [DATA_NEEDED: VCC operating range] | 3 V to 3.6 V (3.3 V nominal) |
| I/O Reference Voltage (VIO) | [DATA_NEEDED: VIO operating range] | — |
| Sleep Mode Current | Low current consumption in sleep mode (exact value [DATA_NEEDED: sleep current in uA]) | — |
| Standby Control | Dedicated standby (STB) pin | — |
| Gehäuse | 8-pin SO (SOIC-8), surface mount | 8-SOIC (D) |
| Montageart | Surface Mount | Surface Mount |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 grade] | — |
| Betriebstemperaturbereich | [DATA_NEEDED: temperature range in C] | — |
| ESD / Transient Immunity | [DATA_NEEDED: IEC 61000-4-2 ESD rating] | — |
| Common-Mode Range | [DATA_NEEDED: bus common-mode range in V] | — |
| Termination | External 60 ohm termination at bus ends (application requirement) | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | Compliant |
| Unit Price Reference | $0.2548 as of 2026-10-28 (LCSC listing) | — |
| Distributor Stock Reference | $0.872 unit price as of 2026-10-28 (ADatasheet listing) | — |
| Number of Drivers/Receivers | — | 1/1 |
| Protocol | — | CANbus (ISO 11898-2) |
| Driver/Receiver Configuration | — | Half-Duplex |
| Standby Mode Supply Current | — | 370 uA typical |
| ESD Protection (Bus Pins, HBM) | — | Exceeds 16 kV |
| Maximum Nodes on Bus | — | 120 nodes |
| Receiver Common-Mode Range | — | -2 V to 7 V |
| Betriebstemperatur | — | -40C to +85C |
| RS Pin Function | — | Slew-rate control via external resistor |