TLE8250GVIOXUMA5 vs TLE6250GV33XUMA1 Comparison
Detailed side-by-side comparison of TLE8250GVIOXUMA5 by Infineon and TLE6250GV33XUMA1 by Infineon. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Specification Comparison
| Parameter | TLE8250GVIOXUMA5 | TLE6250GV33XUMA1 |
|---|---|---|
| Brand | Infineon | Infineon |
| Category | Interface ICs | Interface ICs |
| Lifecycle Status | Active | End of Life |
| Protocol | CANbus | — |
| Data Rate | 1 MBd | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half | — |
| Supply Voltage | 4.5 V to 5.5 V | — |
| Receiver Hysteresis | 200 mV | — |
| Operating Temperature | -40C to +150C | — |
| Mounting Type | Surface Mount | Surface mount |
| Supplier Device Package | PG-DSO-8-16 | — |
| Package / Case | 8-SOIC (0.154in, 3.90mm Width) | — |
| Physical Layer Standard | ISO 11898-2 (high-speed CAN) | — |
| I/O Voltage Input (VIO) | Yes, separate logic-level supply | — |
| ESD Protection | Robust ESD protection on bus pins | [DATA_NEEDED: ESD protection ratings] |
| EME/EMI | Low electromagnetic emission, high EMI immunity | — |
| ECCN | EAR99 | — |
| HTSUS | 8542.39.0001 | — |
| Moisture Sensitivity Level | 2A | — |
| Part Status | Active | — |
| Product Type | — | CAN bus transceiver |
| CAN Transceiver Type | — | 1/1 half-duplex transceiver |
| Maximum CAN Data Rate | — | 1 Mbit/s |
| Supply Voltage Range | — | 12 V to 24 V |
| Logic I/O Voltage Range | — | 3.3 V to 5 V |
| Typical Operating Current | — | 70 mA |
| Supply Compatibility | — | 12 V and 24 V automotive battery systems |
| Operating Modes | — | Normal mode and standby mode |
| Standby Function | — | Disables both receiver and transmitter |
| Control Interface | — | INH control pin |
| Receive-Only Configuration | — | RM pin left open when the receive-only feature is not used |
| Normal-Mode Configuration | — | INH pin connected to ground when standby mode is not used |
| CAN Compatibility | — | ISO 11898 |
| EMC Capability | — | Automotive CAN transceiver with EMC performance |
| Package | — | PG-DSO-8 |
| Package Pin Count | — | 8 pins |
| Packaging | — | Tape and reel |
| Automotive Qualification | — | AEC-Q100 |
| RoHS Status | — | RoHS compliant green product |
| Lead-Free Finish | — | Pb-free finish on leads |
| Soldering Standard | — | IPC/JEDEC J-STD-020 |
| REACH Status | — | unknown |
| Operating Temperature Range | — | [DATA_NEEDED: operating temperature range] |
| Transmitter Propagation Delay | — | [DATA_NEEDED: transmitter propagation delay] |
| Receiver Propagation Delay | — | [DATA_NEEDED: receiver propagation delay] |
| Bus Fault Protection | — | [DATA_NEEDED: bus fault protection limits] |