TLE8250GVIOXUMA5 vs TLE6250GV33XUMA1 Perbandingan
Perbandingan bersamaan detil TLE8250GVIOXUMA5 dari Infineon dan TLE6250GV33XUMA1 dari Infineon. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | TLE8250GVIOXUMA5 | TLE6250GV33XUMA1 |
|---|---|---|
| Merek | Infineon | Infineon |
| Kategori | Interface ICs | Interface ICs |
| Status Lingkungan Hidup | Aktif | Akhir Hidup |
| Protocol | CANbus | — |
| Laju Data | 1 MBd | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half | — |
| Tegangan Pemuat | 4.5 V to 5.5 V | — |
| Receiver Hysteresis | 200 mV | — |
| Suhu Kerja | -40C to +150C | — |
| Tipe Mounting | Surface Mount | Surface mount |
| Supplier Device Package | PG-DSO-8-16 | — |
| Paket / Case | 8-SOIC (0.154in, 3.90mm Width) | — |
| Physical Layer Standard | ISO 11898-2 (high-speed CAN) | — |
| I/O Voltage Input (VIO) | Yes, separate logic-level supply | — |
| ESD Protection | Robust ESD protection on bus pins | [DATA_NEEDED: ESD protection ratings] |
| EME/EMI | Low electromagnetic emission, high EMI immunity | — |
| ECCN | EAR99 | — |
| HTSUS | 8542.39.0001 | — |
| Moisture Sensitivity Level | 2A | — |
| Part Status | Active | — |
| Product Type | — | CAN bus transceiver |
| CAN Transceiver Type | — | 1/1 half-duplex transceiver |
| Maximum CAN Data Rate | — | 1 Mbit/s |
| Supply Voltage Range | — | 12 V to 24 V |
| Logic I/O Voltage Range | — | 3.3 V to 5 V |
| Typical Operating Current | — | 70 mA |
| Supply Compatibility | — | 12 V and 24 V automotive battery systems |
| Operating Modes | — | Normal mode and standby mode |
| Standby Function | — | Disables both receiver and transmitter |
| Control Interface | — | INH control pin |
| Receive-Only Configuration | — | RM pin left open when the receive-only feature is not used |
| Normal-Mode Configuration | — | INH pin connected to ground when standby mode is not used |
| CAN Compatibility | — | ISO 11898 |
| EMC Capability | — | Automotive CAN transceiver with EMC performance |
| Paket | — | PG-DSO-8 |
| Package Pin Count | — | 8 pins |
| Packaging | — | Tape and reel |
| Automotive Qualification | — | AEC-Q100 |
| Status RoHS | — | RoHS compliant green product |
| Lead-Free Finish | — | Pb-free finish on leads |
| Soldering Standard | — | IPC/JEDEC J-STD-020 |
| REACH Status | — | unknown |
| Rentang Suhu Kerja | — | [DATA_NEEDED: operating temperature range] |
| Transmitter Propagation Delay | — | [DATA_NEEDED: transmitter propagation delay] |
| Receiver Propagation Delay | — | [DATA_NEEDED: receiver propagation delay] |
| Bus Fault Protection | — | [DATA_NEEDED: bus fault protection limits] |