TLE8250GVIOXUMA5 vs TLE6250GV33XUMA1 Comparación

Comparación detallada lado a lado de TLE8250GVIOXUMA5 por Infineon y TLE6250GV33XUMA1 por Infineon. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.

Infineon
TLE6250GV33XUMA1 TLE6250GV33XUMA1 - 1 Mbit/s CAN Transceiver | Infineon

TLE6250GV33XUMA1 - 1 Mbit/s CAN Transceiver | Infineon

TLE6250GV33XUMA1 ✗ Fin de vida

Comparación de especificaciones

Parámetro TLE8250GVIOXUMA5 TLE6250GV33XUMA1
Marca Infineon Infineon
Categoría Interface ICs Interface ICs
Estado del ciclo de vida Activo Fin de vida
Protocol CANbus —
Velocidad de datos 1 MBd —
Number of Drivers/Receivers 1/1 —
Duplex Half —
Tensión de alimentación 4.5 V to 5.5 V —
Receiver Hysteresis 200 mV —
Temperatura de funcionamiento -40C to +150C —
Tipo de montaje Surface Mount Surface mount
Supplier Device Package PG-DSO-8-16 —
Encapsulado / Carcasa 8-SOIC (0.154in, 3.90mm Width) —
Physical Layer Standard ISO 11898-2 (high-speed CAN) —
I/O Voltage Input (VIO) Yes, separate logic-level supply —
ESD Protection Robust ESD protection on bus pins [DATA_NEEDED: ESD protection ratings]
EME/EMI Low electromagnetic emission, high EMI immunity —
ECCN EAR99 —
HTSUS 8542.39.0001 —
Moisture Sensitivity Level 2A —
Part Status Active —
Product Type — CAN bus transceiver
CAN Transceiver Type — 1/1 half-duplex transceiver
Maximum CAN Data Rate — 1 Mbit/s
Supply Voltage Range — 12 V to 24 V
Logic I/O Voltage Range — 3.3 V to 5 V
Typical Operating Current — 70 mA
Supply Compatibility — 12 V and 24 V automotive battery systems
Operating Modes — Normal mode and standby mode
Standby Function — Disables both receiver and transmitter
Control Interface — INH control pin
Receive-Only Configuration — RM pin left open when the receive-only feature is not used
Normal-Mode Configuration — INH pin connected to ground when standby mode is not used
CAN Compatibility — ISO 11898
EMC Capability — Automotive CAN transceiver with EMC performance
Encapsulado — PG-DSO-8
Package Pin Count — 8 pins
Packaging — Tape and reel
Automotive Qualification — AEC-Q100
Estado RoHS — RoHS compliant green product
Lead-Free Finish — Pb-free finish on leads
Soldering Standard — IPC/JEDEC J-STD-020
REACH Status — unknown
Rango de temperatura de funcionamiento — [DATA_NEEDED: operating temperature range]
Transmitter Propagation Delay — [DATA_NEEDED: transmitter propagation delay]
Receiver Propagation Delay — [DATA_NEEDED: receiver propagation delay]
Bus Fault Protection — [DATA_NEEDED: bus fault protection limits]

Hojas de datos y recursos

Examinar todos los productos Crear BOM Solicitar cotización