TLE8250GVIOXUMA5 vs TLE6250GV33XUMA1 Comparaison
Comparaison détaillée côte à côte de TLE8250GVIOXUMA5 par Infineon et TLE6250GV33XUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | TLE8250GVIOXUMA5 | TLE6250GV33XUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Fin de vie |
| Protocol | CANbus | — |
| Débit de données | 1 MBd | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half | — |
| Tension d'alimentation | 4.5 V to 5.5 V | — |
| Receiver Hysteresis | 200 mV | — |
| Température de fonctionnement | -40C to +150C | — |
| Type de montage | Surface Mount | Surface mount |
| Supplier Device Package | PG-DSO-8-16 | — |
| Boîtier / Format | 8-SOIC (0.154in, 3.90mm Width) | — |
| Physical Layer Standard | ISO 11898-2 (high-speed CAN) | — |
| I/O Voltage Input (VIO) | Yes, separate logic-level supply | — |
| ESD Protection | Robust ESD protection on bus pins | [DATA_NEEDED: ESD protection ratings] |
| EME/EMI | Low electromagnetic emission, high EMI immunity | — |
| ECCN | EAR99 | — |
| HTSUS | 8542.39.0001 | — |
| Moisture Sensitivity Level | 2A | — |
| Part Status | Active | — |
| Product Type | — | CAN bus transceiver |
| CAN Transceiver Type | — | 1/1 half-duplex transceiver |
| Maximum CAN Data Rate | — | 1 Mbit/s |
| Supply Voltage Range | — | 12 V to 24 V |
| Logic I/O Voltage Range | — | 3.3 V to 5 V |
| Typical Operating Current | — | 70 mA |
| Supply Compatibility | — | 12 V and 24 V automotive battery systems |
| Operating Modes | — | Normal mode and standby mode |
| Standby Function | — | Disables both receiver and transmitter |
| Control Interface | — | INH control pin |
| Receive-Only Configuration | — | RM pin left open when the receive-only feature is not used |
| Normal-Mode Configuration | — | INH pin connected to ground when standby mode is not used |
| CAN Compatibility | — | ISO 11898 |
| EMC Capability | — | Automotive CAN transceiver with EMC performance |
| Boîtier | — | PG-DSO-8 |
| Package Pin Count | — | 8 pins |
| Packaging | — | Tape and reel |
| Automotive Qualification | — | AEC-Q100 |
| Statut RoHS | — | RoHS compliant green product |
| Lead-Free Finish | — | Pb-free finish on leads |
| Soldering Standard | — | IPC/JEDEC J-STD-020 |
| REACH Status | — | unknown |
| Plage de température de fonctionnement | — | [DATA_NEEDED: operating temperature range] |
| Transmitter Propagation Delay | — | [DATA_NEEDED: transmitter propagation delay] |
| Receiver Propagation Delay | — | [DATA_NEEDED: receiver propagation delay] |
| Bus Fault Protection | — | [DATA_NEEDED: bus fault protection limits] |