Texas Instruments

TUSB212RWBT - USB 2.0 HS Signal Conditioner | Texas Instruments

MPN: TUSB212RWBT ✓ Active
12-X2QFN Package Low-Speed, Full-Speed, and High-Speed Speed
MOQ: 1 |

TUSB212RWBT Overview

The Texas Instruments TUSB212RWBT is a USB 2.0 high-speed signal conditioner with DC boost, housed in a 12-X2QFN surface-mount package measuring 1.6 mm by 1.6 mm. It is designed to compensate for intersymbol interference in lossy USB channels while supporting Low-Speed, Full-Speed, and High-Speed signaling. The device is configurable by pin strap or I2C and supports selectable signal gain, including daisy-chain operation for high-loss applications.

A USB signal conditioner is an interface IC placed within a USB data path to improve signal integrity without changing the underlying USB protocol. Its hierarchy is USB interface device, signal-processing interface IC, and interface IC. The TUSB212 specifically targets USB 2.0 channels in which connector launches, PCB traces, cables, or intervening devices have introduced bandwidth-related distortion. The conditioner supports USB 2.0, OTG 2.0, and Battery Charger 1.2 environments as identified by Texas Instruments.

The principal features include programmable AC boost, programmable DC boost, pin-strap or I2C configuration, and selectable gain. According to the manufacturer product page, the device supports channels up to 5 meters before the conditioning point or 2 meters after it. It also handles D1P/M and D2P/M interchangeably, is agnostic to host or device roles, and maintains compatibility across Low-Speed, Full-Speed, and High-Speed signals.

Technically, the TUSB212 applies frequency-dependent correction intended to counter channel loss and intersymbol interference. AC boost controls the high-frequency correction applied to the data waveform, while DC boost adjusts the low-frequency transition baseline. Four selectable AC boost settings are described by Texas Instruments, and the I2C or pin-strap interface allows implementation choices to suit board constraints. The design is intended to preserve Low-Speed and Full-Speed characteristics while compensating High-Speed signals.

Typical applications include USB hubs, host controllers, peripheral ports, cable assemblies, docking systems, and test equipment with degraded or lossy channels. The interchangeable D1P/M and D2P/M interfaces simplify symmetrical USB routing, while the compact 12-X2QFN package supports space-constrained portable and industrial designs. The I2C configuration option also permits controlled adjustments where fixed pin straps are insufficient.

Designers should place the conditioner close to the channel impairment boundary and confirm the supported pre-channel or post-channel distance. USB differential routing must preserve controlled impedance and minimize stubs, while the I2C and configuration pins require appropriate pull networks. Verify the selected boost setting with compliance masks, eye diagrams, and worst-case cable and connector combinations rather than relying on nominal channel length alone.

Drop-in alternatives for TUSB212RWBT — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with TUSB212RWBT (same form factor and footprint) — differing in Package.

Texas Instruments
Package: 12-X2QFN (1.6 mm x 1.6 mm)
Compare with TUSB212RWBT →

TUSB212RWBR

✅ Drop-In
Texas Instruments
📦 12-X2QFN
USB 2.0 High-Speed Signal Conditioner · USB 2.0 High-Speed · Programmable AC boost and DC boost · Intersymbol interference from transmission-channel loss · Unaffected by the High-Speed compensation · Unaffected by the High-Speed compensation · Compatible · 12-X2QFN (1.6 mm x 1.6 mm)

Contact for price

View Datasheet →

TUSB212RWBT Specifications

Product Type USB 2.0 high-speed signal conditioner
USB Version USB 2.0
Supported USB Speeds Low-Speed, Full-Speed, and High-Speed
Compatibility USB 2.0, OTG 2.0, and BC 1.2
Maximum Pre-Channel Length 5 m
Maximum Post-Channel Length 2 m
AC Boost Configuration Four selectable settings
Configuration Interface Pin strap or I2C
Differential Pair Handling D1P/M and D2P/M interchangeable
Host Device Role Host and device agnostic
Gain Architecture Selectable gain with daisy-chain support
Correction Function Intersymbol interference compensation
Package 12-X2QFN
Package Dimensions 1.6 mm x 1.6 mm
Mounting Type Surface mount
RoHS Status Compliant
Lifecycle Status Active

TUSB212RWBT 1.6 mm x 1.6 mm Pin Configuration Guide

Pin configuration for TUSB212RWBT (1.6 mm x 1.6 mm package). Pin numbering, functions, and connection diagrams are defined in the manufacturer datasheet. Refer to it for the exact footprint and soldering guidelines.

1.6 mm x 1.6 mm package pinout diagram for TUSB212RWBT

No detailed pinout data available for TUSB212RWBT.

Refer to the datasheet for full pin configuration.

Typical Applications

TUSB212RWBT is suitable for 6 applications: USB 2.0 Hub Signal Conditioning, USB Docking Station Interconnect, Portable USB-C to USB-A Adapter, USB Test and Measurement Fixture, Industrial USB Gateway, USB Host Expansion Card.

🌐

USB 2.0 Hub Signal Conditioning

The TUSB212RWBT fits between a USB 2.0 hub downstream port and a loss-prone interconnect when High-Speed eye margin has degraded. Its four selectable AC boost settings, programmable DC boost, and support for Low-Speed, Full-Speed, and High-Speed signaling allow one device to serve mixed-speed ports without intentionally changing slower traffic. Position the conditioner near the impairment boundary, retain controlled differential impedance, and verify each boost setting with eye diagrams. The stated 5-meter pre-channel and 2-meter post-channel limits must be treated as maximum design constraints rather than guaranteed margin in every cable and connector combination.

🖥️

USB Docking Station Interconnect

A docking station often combines long internal traces, connector launches, and external cable transitions that can degrade USB 2.0 High-Speed signals. The TUSB212RWBT provides programmable AC and DC boost to compensate for that channel, while its interchangeable D1P/M and D2P/M interfaces simplify polarity-aware routing. Use pin straps for a fixed, validated setting or I2C when firmware needs to adjust compensation. Confirm compliance at the longest supported post-channel distance of 2 meters and test combinations of dock cable, display adapters, and peripheral loads rather than relying on a nominal cable-length figure.

📱

Portable USB-C to USB-A Adapter

Compact adapters can place a USB 2.0 High-Speed channel across a PCB transition between connector types, increasing insertion-loss and impedance-discontinuity risk. The TUSB212RWBT’s 12-X2QFN package measures 1.6 mm by 1.6 mm, allowing signal repair close to the transition without dominating a small board. Its Low-Speed and Full-Speed agnostic behavior preserves compatibility with attached accessories. Designers should maintain uniform impedance through the adapter, avoid unnecessary branches, and use the manufacturer recommended QFN land pattern and exposed-pad connection for reliable operation.

🔧

USB Test and Measurement Fixture

Test fixtures frequently include long cable tails, adapters, relay contacts, and probe structures that increase USB High-Speed channel loss. The TUSB212RWBT can compensate for intersymbol interference in such a channel while remaining transparent to Low-Speed and Full-Speed operation. Pin-strap control is useful for a repeatable laboratory configuration, while I2C control permits automated characterization of AC boost and DC boost values. Validate the fixture with the intended cables and accessories and record eye width, jitter, and compliance results for every supported configuration.

🏭

Industrial USB Gateway

Industrial gateways often connect external sensors and service equipment through USB ports with cable runs longer than typical internal board channels. The TUSB212RWBT can be placed close to the impaired interface to apply selectable High-Speed compensation, while its host/device-agnostic design supports both sides of a USB connection. Configure the boost through pins for a fixed gateway design or use I2C for controlled adaptation. Confirm electromagnetic behavior, ground continuity, and USB compliance in the finished enclosure because external cable and chassis transitions can materially change the channel response.

💻

USB Host Expansion Card

A host expansion card can suffer from loss accumulated across a mainboard connector, internal cable, and external peripheral lead. The TUSB212RWBT can correct the resulting USB 2.0 High-Speed intersymbol interference without changing the host protocol or requiring a separate path for lower speeds. Its compact 12-X2QFN package supports placement near the expansion connector, and its configurable AC and DC boost allows channel-specific tuning. Use the 5-meter pre-channel or 2-meter post-channel guidance as a boundary, then verify eye diagrams and mask compliance with the actual interconnect.

What is the TUSB212RWBT used for?
The TUSB212RWBT is a USB 2.0 high-speed signal conditioner designed to compensate for intersymbol interference in degraded USB data channels. According to the Texas Instruments TUSB212 datasheet, it improves High-Speed signals while leaving Low-Speed and Full-Speed signal characteristics unaffected. It is suitable for USB hubs, hosts, peripheral ports, cable assemblies, and docking systems where connector and PCB losses have reduced signal margin.
What USB speeds are supported by the TUSB212RWBT?
The TUSB212RWBT supports USB Low-Speed, Full-Speed, and High-Speed signaling. The Texas Instruments product page identifies compatibility with USB 2.0, OTG 2.0, and BC 1.2. Its signal-processing design is agnostic to Low-Speed and Full-Speed signals, while compensation is applied to the High-Speed channel. This makes the device suitable for dual-speed USB ports that must retain standard behavior for slower attached devices.
How is the TUSB212RWBT configured?
The TUSB212RWBT can be configured through pin straps or an I2C interface. Texas Instruments identifies four selectable AC boost settings, programmable AC boost and DC boost, and selectable signal gain as principal control features. Pin-strap control can simplify a fixed design, while I2C control is useful when the compensation setting must be adjusted during system operation or selected by firmware.
What is the maximum USB channel length supported by the TUSB212RWBT?
The TUSB212RWBT supports up to 5 meters of channel before the device or 2 meters after the device. These limits are identified in the Texas Instruments part-details information for TUSB212RWBT. The supported distance depends on the implemented channel, connector, cable, boost setting, and signal-integrity margin, so the final design should still be validated with eye diagrams and applicable USB compliance tests.
Where can I download the TUSB212RWBT datasheet PDF?
The official TUSB212RWBT datasheet can be downloaded from the Texas Instruments product page at https://www.ti.com/product/TUSB212. The manufacturer also provides a direct datasheet link at https://www.ti.com/lit/gpn/TUSB212. Use those documents for the complete pin description, electrical characteristics, control registers, application circuit, and recommended layout instructions before releasing a PCB design.
Where can I find the TUSB212RWBT pinout?
The TUSB212RWBT pinout is defined in the pin-configuration table and package drawing in the Texas Instruments TUSB212 datasheet. The component uses a 12-X2QFN package, and the complete signal names, configuration inputs, supply connections, ground connections, and exposed-pad requirements must be taken from that table. Use the manufacturer pin-description table when assigning PCB tracks and the land pattern.
What is the difference between AC boost and DC boost in the TUSB212RWBT?
AC boost controls the high-frequency signal correction used to improve High-Speed edge quality, while DC boost changes the low-frequency transition baseline. Texas Instruments describes programmable AC boost, programmable DC boost, and four selectable AC boost settings for the TUSB212. Correct setting depends on the measured channel response; excessive correction can add distortion or jitter, so engineers should tune the settings against eye and compliance measurements.
Can the TUSB212RWBT replace a TUSB212RWBR?
The TUSB212RWBR is the same TUSB212 device family and is listed as an established product-page candidate, while TUSB212RWBT is the requested orderable variant. Exact interchangeability should be confirmed by comparing the Texas Instruments orderable-information table for package, tape orientation, and shipping configuration. The final purchasing decision should be entered on the Request a Quote form on this page with the required reel or cut-tape configuration confirmed.
When should I choose the TUSB212RWBT instead of a TUSB211 or TUSB217 device?
Choose the TUSB212RWBT when the design specifically requires AC and DC boost, four selectable AC boost settings, and compatibility with USB Low-Speed, Full-Speed, and High-Speed signaling. The TUSB211 and TUSB217 appear in comparison results but are not established here as pin-to-pin equivalents. Review the official datasheets for each device before substitution because signal-conditioning architecture, configurable ranges, and channel-length support may differ.
Is TUSB212RWBT suitable for a lossy USB hub or docking system?
The TUSB212RWBT is suitable for lossy USB hub and docking-system channels when the impairment is consistent with the device's supported USB 2.0 reach. Its programmable AC and DC boost can correct High-Speed channel distortion, and the interchangeable D1P/M and D2P/M arrangement simplifies routing. Validate the complete connector, cable, and PCB path because nominal distance alone does not guarantee eye margin or compliance.
What should engineers know about the TUSB212RWBT key specifications?
The key TUSB212RWBT specifications are USB 2.0 operation, support for Low-Speed, Full-Speed, and High-Speed signals, pin-strap or I2C configuration, four selectable AC boost settings, and DC boost. Texas Instruments also identifies 5-meter pre-channel and 2-meter post-channel support, interchangeable D1P/M and D2P/M interfaces, and host/device agnostic operation. The package is a 12-X2QFN measuring 1.6 mm by 1.6 mm.
How should the TUSB212RWBT be placed in a USB layout?
Place the TUSB212RWBT close to the point where the channel distortion begins so that the uncorrected portion of the trace remains as short as practical. Maintain controlled differential impedance, minimize stubs and branch mismatches, and follow the Texas Instruments recommended layout for the 12-X2QFN land pattern. Keep sensitive USB routing away from noisy power-conversion regions and verify the final design with eye diagrams.
How does the TUSB212RWBT affect USB Low-Speed and Full-Speed signals?
The TUSB212 design is agnostic to USB Low-Speed and Full-Speed signals and does not alter their signal characteristics. According to the Texas Instruments TUSB212 datasheet, the compensation function targets High-Speed channel loss and intersymbol interference. This behavior allows one conditioner to remain in a dual-speed USB path without intentionally changing the waveform of slower devices.
Is the TUSB212RWBT RoHS compliant?
The TUSB212RWBT is identified as RoHS compliant in the component listing for the exact orderable MPN. The manufacturer product page lists the device as active and provides technical, ordering, and quality information. REACH compliance, halogen-free status, lead-free status, conflict-minerals status, and AEC-Q100 qualification are not established for this exact variant here and should be confirmed with the manufacturer.
Where can I buy the TUSB212RWBT, and what are its price and lead time?
Use the Request a Quote form on this page to ask for TUSB212RWBT pricing, stock, minimum order quantity, and current lead time. Quote requests are the appropriate route because commercial terms can change with order volume, packaging configuration, and market conditions. The page also provides a manufacturer data sheet and an official product-page link so technical and purchasing evaluations can proceed together.
What can replace the TUSB212RWBT on the same PCB footprint?
No five or more independently verified drop-in replacements were established for the exact TUSB212RWBT configuration. The TUSB212RWBR is a same-family orderable candidate, but package, tape orientation, and shipping configuration must be checked before treating it as an interchangeable production part. TUSB211 and TUSB217 appeared in comparison material but were not verified as pin-compatible, so they are not presented as drop-in replacements.
Is TUSB212RWBT the same as a generic USB redriver?
The TUSB212RWBT is not a protocol-aware USB redriver; it is a USB 2.0 high-speed signal conditioner. According to the Texas Instruments datasheet, its purpose is to compensate for intersymbol interference caused by channel loss. The device offers programmable AC and DC boost, selectable gain, pin-strap or I2C control, and compatibility with Low-Speed, Full-Speed, and High-Speed signaling within its specified reach.

Engineering reference data for TUSB212RWBT — comparison, design guidance, and compliance information.

Selection Guide

Choose the TUSB212RWBT when a USB 2.0 channel exhibits High-Speed eye-margin loss and requires adjustable AC and DC boost while retaining Low-Speed and Full-Speed operation. It is particularly appropriate for hubs, docking systems, adapters, and test fixtures with measurable intersymbol interference. Pin-strap control suits a fixed, thoroughly characterized design; I2C is preferable when firmware must tune compensation. The TUSB212RWBR is the closest same-family ordering candidate, but confirm the packing suffix, tape orientation, and production logistics before treating it as interchangeable. TUSB211 and TUSB217 should not be selected solely because they occupy related USB interface positions; compare their official electrical characteristics, control interfaces, and pin assignments. If the channel already meets margin without conditioning, adding the TUSB212RWBT adds cost, placement, and configuration work without a corresponding signal-integrity benefit.

Comparison with Alternatives

Parameter This Product TUSB212RWBR
Package 12-X2QFN 12-X2QFN
Brand Texas Instruments Texas Instruments
Product Type USB 2.0 high-speed signal conditioner USB 2.0 high-speed signal conditioner
USB Compatibility USB 2.0, OTG 2.0, and BC 1.2 USB 2.0, OTG 2.0, and BC 1.2
Supported Signaling Low-Speed, Full-Speed, and High-Speed Low-Speed, Full-Speed, and High-Speed
Configuration Method Pin strap or I2C Pin strap or I2C
AC Boost Four selectable settings Four selectable settings
DC Boost Programmable Programmable
Maximum Pre-Channel Length 5 m 5 m
Maximum Post-Channel Length 2 m 2 m
Package Dimensions 1.6 mm x 1.6 mm 1.6 mm x 1.6 mm

Key Differentiators

  • Combines AC boost, DC boost, and selectable gain in one USB conditioner (vs TUSB212RWBR)
  • Preserves Low-Speed and Full-Speed behavior while correcting High-Speed loss (vs TUSB212RWBR)
  • Supports both fixed and firmware-managed compensation control (vs TUSB212RWBR)

Design Notes

Place the TUSB212RWBT near the boundary where the USB channel begins losing usable High-Speed margin. Keep the D1 and D2 traces matched, preserve the intended differential impedance, and avoid stubs or test pads that create reflections. Follow the Texas Instruments recommended 12-X2QFN land pattern and exposed-pad connection. Validate the final assembly with eye diagrams because connector launches, via structures, and cable transitions can dominate the conditioner’s own contribution.

Tune AC boost and DC boost from measured channel response rather than selecting the strongest available setting. Begin with eye width, jitter, and USB mask results at the intended worst-case cable and load, then evaluate the four selectable AC boost settings comparatively. Excessive equalization can increase jitter or create unintended waveform distortion. A repeatable bench procedure helps prevent the compensated channel from appearing acceptable only at room temperature with one test setup.

Use the supply and decoupling recommendations in the Texas Instruments TUSB212 datasheet when assigning the power pins and ground connections. Keep input and output bypass paths short, provide the required exposed-pad connection, and maintain a low-impedance ground reference. Since detailed supply-voltage and current limits are not established for the exact variant here, verify them in the manufacturer documentation before fixing the power architecture.

Do not treat the 5-meter pre-channel and 2-meter post-channel figures as guaranteed compliance in every implementation. The usable distance depends on the complete signal path, including connectors, cables, PCB transitions, loads, and the selected boost mode. Also verify whether the channel is upstream or downstream of the conditioner, because the applicable boundary differs. Document the worst-case configuration and retest it after cable, firmware, or board changes.

Compliance Information

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

The exact TUSB212RWBT listing identifies the device as RoHS compliant and active. No exact-variant qualification or material-compliance statement establishes REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.

Related Searches

TUSB212RWBT datasheet TUSB212RWBT datasheet pdf TUSB212RWBT pinout TUSB212RWBT footprint Texas Instruments TUSB212RWBT TUSB212RWBT replacement TUSB212RWBT equivalent TUSB212RWBT vs TUSB212RWBR TUSB212RWBT USB hub signal conditioner TUSB212RWBT I2C configuration TUSB212RWBT AC boost settings TUSB212RWBT price

Related Components & Terms

Texas Instruments TUSB212RWBT TUSB212RWBR TUSB211RWBR TUSB212 USB 2.0 USB high-speed signal conditioner USB interface IC signal-processing interface IC intersymbol interference ISI AC boost DC boost pin strap I2C Low-Speed Full-Speed High-Speed USB OTG 2.0 BC 1.2 12-X2QFN QFN family surface mount RoHS differential signal integrity
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details