2ED2410EMXUMA1 vs BTS70402EPGXUMA1 Vergleich
Detaillierter Direktvergleich von 2ED2410EMXUMA1 von Infineon und BTS70402EPGXUMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | 2ED2410EMXUMA1 | BTS70402EPGXUMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $1,78 | $3,18 |
| Driver Type | High-Side N-Channel MOSFET Gate Driver | — |
| Anzahl der Ausgänge | 2 (independent) | — |
| Configuration | Non-Inverting | — |
| Supply Voltage Range (VS) | 8 V to 36 V | — |
| Logic/VBAT Voltage Range | 3 V to 58 V | — |
| Source Current (typ.) | 175 mA | — |
| Sink Current (typ.) | 350 mA | — |
| Anstiegszeit | 2 µs | — |
| Abfallzeit | 7 µs | — |
| Betriebstemperaturbereich | -40 °C to +150 °C | -40 °C to +150 °C junction |
| Gehäuse | PG-TSDSO-24 (exposed pad) | PG-TSDSO-14 (exposed thermal pad) |
| Montageart | Surface Mount | Surface Mount |
| Logic Input Compatibility | 3.3 V and 5 V MCU | — |
| Protection Features | Enable/Shutdown, Overcurrent Protection (OCP), Interleaved Conduction Protection, Charge Pump | Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection |
| Automotive Qualification | AEC-Q100 | — |
| RoHS-Status | Compliant | — |
| Manufacturer | — | Infineon Technologies |
| Part Family | — | PROFET+2 (BTS70xxx series) |
| Funktion | — | Smart High-Side Power Switch |
| Number of Channels | — | 4 |
| Ausgangskonfiguration | — | High-side, N-channel MOSFET |
| Continuous Load Current per Channel | — | 3.5 A (typical) |
| On-State Resistance (Ron) per Channel | — | 65 mOhm typical |
| Operating Voltage Range | — | 6 V to 18 V nominal (load-dump tolerant to 40 V) |
| Logic Supply Voltage | — | 3.3 V / 5 V compatible MCU I/O |
| Diagnostic Interface | — | SPI status register, current-sense feedback |
| AEC-Q100 Qualification | — | Qualified (automotive grade) |
| RoHS Compliance | — | Compliant |