2ED2410EMXUMA1 vs BTS70402EPGXUMA1 Comparaison
Comparaison détaillée côte à côte de 2ED2410EMXUMA1 par Infineon et BTS70402EPGXUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | 2ED2410EMXUMA1 | BTS70402EPGXUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $1,78 | $3,18 |
| Driver Type | High-Side N-Channel MOSFET Gate Driver | — |
| Nombre de sorties | 2 (independent) | — |
| Configuration | Non-Inverting | — |
| Supply Voltage Range (VS) | 8 V to 36 V | — |
| Logic/VBAT Voltage Range | 3 V to 58 V | — |
| Source Current (typ.) | 175 mA | — |
| Sink Current (typ.) | 350 mA | — |
| Temps de montée | 2 µs | — |
| Temps de descente | 7 µs | — |
| Plage de température de fonctionnement | -40 °C to +150 °C | -40 °C to +150 °C junction |
| Boîtier | PG-TSDSO-24 (exposed pad) | PG-TSDSO-14 (exposed thermal pad) |
| Type de montage | Surface Mount | Surface Mount |
| Logic Input Compatibility | 3.3 V and 5 V MCU | — |
| Protection Features | Enable/Shutdown, Overcurrent Protection (OCP), Interleaved Conduction Protection, Charge Pump | Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection |
| Automotive Qualification | AEC-Q100 | — |
| Statut RoHS | Compliant | — |
| Manufacturer | — | Infineon Technologies |
| Part Family | — | PROFET+2 (BTS70xxx series) |
| Fonction | — | Smart High-Side Power Switch |
| Number of Channels | — | 4 |
| Configuration de sortie | — | High-side, N-channel MOSFET |
| Continuous Load Current per Channel | — | 3.5 A (typical) |
| On-State Resistance (Ron) per Channel | — | 65 mOhm typical |
| Operating Voltage Range | — | 6 V to 18 V nominal (load-dump tolerant to 40 V) |
| Logic Supply Voltage | — | 3.3 V / 5 V compatible MCU I/O |
| Diagnostic Interface | — | SPI status register, current-sense feedback |
| AEC-Q100 Qualification | — | Qualified (automotive grade) |
| RoHS Compliance | — | Compliant |