2ED2410EMXUMA1 vs BTS70402EPGXUMA1 Comparación
Comparación detallada lado a lado de 2ED2410EMXUMA1 por Infineon y BTS70402EPGXUMA1 por Infineon. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | 2ED2410EMXUMA1 | BTS70402EPGXUMA1 |
|---|---|---|
| Marca | Infineon | Infineon |
| Categoría | Power MOSFET Drivers | Power MOSFET Drivers |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $1,78 | $3,18 |
| Driver Type | High-Side N-Channel MOSFET Gate Driver | — |
| Número de salidas | 2 (independent) | — |
| Configuration | Non-Inverting | — |
| Supply Voltage Range (VS) | 8 V to 36 V | — |
| Logic/VBAT Voltage Range | 3 V to 58 V | — |
| Source Current (typ.) | 175 mA | — |
| Sink Current (typ.) | 350 mA | — |
| Tiempo de subida | 2 µs | — |
| Tiempo de bajada | 7 µs | — |
| Rango de temperatura de funcionamiento | -40 °C to +150 °C | -40 °C to +150 °C junction |
| Encapsulado | PG-TSDSO-24 (exposed pad) | PG-TSDSO-14 (exposed thermal pad) |
| Tipo de montaje | Surface Mount | Surface Mount |
| Logic Input Compatibility | 3.3 V and 5 V MCU | — |
| Protection Features | Enable/Shutdown, Overcurrent Protection (OCP), Interleaved Conduction Protection, Charge Pump | Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection |
| Automotive Qualification | AEC-Q100 | — |
| Estado RoHS | Compliant | — |
| Manufacturer | — | Infineon Technologies |
| Part Family | — | PROFET+2 (BTS70xxx series) |
| Función | — | Smart High-Side Power Switch |
| Number of Channels | — | 4 |
| Configuración de salida | — | High-side, N-channel MOSFET |
| Continuous Load Current per Channel | — | 3.5 A (typical) |
| On-State Resistance (Ron) per Channel | — | 65 mOhm typical |
| Operating Voltage Range | — | 6 V to 18 V nominal (load-dump tolerant to 40 V) |
| Logic Supply Voltage | — | 3.3 V / 5 V compatible MCU I/O |
| Diagnostic Interface | — | SPI status register, current-sense feedback |
| AEC-Q100 Qualification | — | Qualified (automotive grade) |
| RoHS Compliance | — | Compliant |