AD5258BRMZ100 vs AD5142ABCPZ10-RL7 Vergleich
Detaillierter Direktvergleich von AD5258BRMZ100 von Analog Devices und AD5142ABCPZ10-RL7 von Analog Devices. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Analog Devices
AD5258BRMZ100 - 100kΩ 64-Tap I2C Nonvolatile DigiPot | ADI
AD5258BRMZ100 ⚠ Letzte BestellmöglichkeitAnalog Devices
AD5142ABCPZ10-RL7 - Dual 10kΩ 256-Tap I²C Non-Volatile DigiPot | Analog Devices
AD5142ABCPZ10-RL7 ✓ AktivSpezifikationsvergleich
| Parameter | AD5258BRMZ100 | AD5142ABCPZ10-RL7 |
|---|---|---|
| Marke | Analog Devices | Analog Devices |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Letzte Kaufgelegenheit | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $1,08 | $3,36 |
| Product Type | Digital Potentiometer (DigiPOT) | — |
| Number of Channels | 1 | — |
| Number of Taps | 64 | 256 positions |
| End-to-End Resistance | 100 kΩ | — |
| Resistance Tolerance | ±30 % | — |
| EEPROM-stored Tolerance Accuracy | 0.1 % | — |
| Schnittstelle | I²C-compatible (2-wire) | I²C-compatible (SCL up to 3 MHz) |
| Address Decode Pins | AD0 (2 pins, supports up to 4 devices on bus) | — |
| VLOGIC Range | 2.7 V to 5.5 V | — |
| Analog Supply / Terminal Voltage | 2.7 V to 5.5 V | — |
| Power-on EEPROM Refresh Time | < 1 ms | — |
| Nonvolatile Memory | Yes (wiper settings retained on power-down) | — |
| Software Write Protect | Yes (via I²C command) | — |
| Betriebstemperaturbereich | −40 °C to +125 °C | — |
| Gehäuse | 10-pin MSOP (RM), 3 mm × 4.9 mm | 16-lead LFCSP (3 mm × 3 mm) with EP |
| Taper | Linear | Linear |
| RoHS-Status | Compliant | Compliant |
| Number of Potentiometers | — | 2 (dual) |
| Nominal End-to-End Resistance (R-AB) | — | 10 kΩ |
| Speichertyp | — | Non-volatile EEPROM |
| Resistor Tolerance | — | ±8% |
| Temperature Coefficient | — | 35 ppm/°C nominal |
| Wiper Resistance (ends of array) | — | 40 Ω typical |
| Continuous Current on A/B/W Pins | — | ±6 mA max |
| Supply Voltage (VDD) | — | 2.3 V to 5.5 V |
| Betriebstemperatur | — | -40 °C to +125 °C |
| Montageart | — | Surface Mount |
| AEC-Q100 Qualification | — | Not AEC-Q100 qualified (industrial grade) |
| Soft Reset | — | Yes (loads default wiper setting) |