AD5258BRMZ100 vs AD5142ABCPZ10-RL7 Comparación
Comparación detallada lado a lado de AD5258BRMZ100 por Analog Devices y AD5142ABCPZ10-RL7 por Analog Devices. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Analog Devices
AD5258BRMZ100 - 100kΩ 64-Tap I2C Nonvolatile DigiPot | ADI
AD5258BRMZ100 ⚠ Última compraAnalog Devices
AD5142ABCPZ10-RL7 - Dual 10kΩ 256-Tap I²C Non-Volatile DigiPot | Analog Devices
AD5142ABCPZ10-RL7 ✓ ActivoComparación de especificaciones
| Parámetro | AD5258BRMZ100 | AD5142ABCPZ10-RL7 |
|---|---|---|
| Marca | Analog Devices | Analog Devices |
| Categoría | Amplifier ICs | Amplifier ICs |
| Estado del ciclo de vida | Última compra | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $1,08 | $3,36 |
| Product Type | Digital Potentiometer (DigiPOT) | — |
| Number of Channels | 1 | — |
| Number of Taps | 64 | 256 positions |
| End-to-End Resistance | 100 kΩ | — |
| Resistance Tolerance | ±30 % | — |
| EEPROM-stored Tolerance Accuracy | 0.1 % | — |
| Interfaz | I²C-compatible (2-wire) | I²C-compatible (SCL up to 3 MHz) |
| Address Decode Pins | AD0 (2 pins, supports up to 4 devices on bus) | — |
| VLOGIC Range | 2.7 V to 5.5 V | — |
| Analog Supply / Terminal Voltage | 2.7 V to 5.5 V | — |
| Power-on EEPROM Refresh Time | < 1 ms | — |
| Nonvolatile Memory | Yes (wiper settings retained on power-down) | — |
| Software Write Protect | Yes (via I²C command) | — |
| Rango de temperatura de funcionamiento | −40 °C to +125 °C | — |
| Encapsulado | 10-pin MSOP (RM), 3 mm × 4.9 mm | 16-lead LFCSP (3 mm × 3 mm) with EP |
| Taper | Linear | Linear |
| Estado RoHS | Compliant | Compliant |
| Number of Potentiometers | — | 2 (dual) |
| Nominal End-to-End Resistance (R-AB) | — | 10 kΩ |
| Tipo de memoria | — | Non-volatile EEPROM |
| Resistor Tolerance | — | ±8% |
| Temperature Coefficient | — | 35 ppm/°C nominal |
| Wiper Resistance (ends of array) | — | 40 Ω typical |
| Continuous Current on A/B/W Pins | — | ±6 mA max |
| Supply Voltage (VDD) | — | 2.3 V to 5.5 V |
| Temperatura de funcionamiento | — | -40 °C to +125 °C |
| Tipo de montaje | — | Surface Mount |
| AEC-Q100 Qualification | — | Not AEC-Q100 qualified (industrial grade) |
| Soft Reset | — | Yes (loads default wiper setting) |