AD5258BRMZ100 vs AD5142ABCPZ10-RL7 Comparaison
Comparaison détaillée côte à côte de AD5258BRMZ100 par Analog Devices et AD5142ABCPZ10-RL7 par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Analog Devices
AD5258BRMZ100 - 100kΩ 64-Tap I2C Nonvolatile DigiPot | ADI
AD5258BRMZ100 ⚠ Dernier achatAnalog Devices
AD5142ABCPZ10-RL7 - Dual 10kΩ 256-Tap I²C Non-Volatile DigiPot | Analog Devices
AD5142ABCPZ10-RL7 ✓ ActifComparaison des spécifications
| Paramètre | AD5258BRMZ100 | AD5142ABCPZ10-RL7 |
|---|---|---|
| Marque | Analog Devices | Analog Devices |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Dernier achat | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $1,08 | $3,36 |
| Product Type | Digital Potentiometer (DigiPOT) | — |
| Number of Channels | 1 | — |
| Number of Taps | 64 | 256 positions |
| End-to-End Resistance | 100 kΩ | — |
| Resistance Tolerance | ±30 % | — |
| EEPROM-stored Tolerance Accuracy | 0.1 % | — |
| Interface | I²C-compatible (2-wire) | I²C-compatible (SCL up to 3 MHz) |
| Address Decode Pins | AD0 (2 pins, supports up to 4 devices on bus) | — |
| VLOGIC Range | 2.7 V to 5.5 V | — |
| Analog Supply / Terminal Voltage | 2.7 V to 5.5 V | — |
| Power-on EEPROM Refresh Time | < 1 ms | — |
| Nonvolatile Memory | Yes (wiper settings retained on power-down) | — |
| Software Write Protect | Yes (via I²C command) | — |
| Plage de température de fonctionnement | −40 °C to +125 °C | — |
| Boîtier | 10-pin MSOP (RM), 3 mm × 4.9 mm | 16-lead LFCSP (3 mm × 3 mm) with EP |
| Taper | Linear | Linear |
| Statut RoHS | Compliant | Compliant |
| Number of Potentiometers | — | 2 (dual) |
| Nominal End-to-End Resistance (R-AB) | — | 10 kΩ |
| Type de mémoire | — | Non-volatile EEPROM |
| Resistor Tolerance | — | ±8% |
| Temperature Coefficient | — | 35 ppm/°C nominal |
| Wiper Resistance (ends of array) | — | 40 Ω typical |
| Continuous Current on A/B/W Pins | — | ±6 mA max |
| Supply Voltage (VDD) | — | 2.3 V to 5.5 V |
| Température de fonctionnement | — | -40 °C to +125 °C |
| Type de montage | — | Surface Mount |
| AEC-Q100 Qualification | — | Not AEC-Q100 qualified (industrial grade) |
| Soft Reset | — | Yes (loads default wiper setting) |