ADC12DL040CIVS vs ADC12040CIVY Vergleich
Detaillierter Direktvergleich von ADC12DL040CIVS von Texas Instruments und ADC12040CIVY von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
ADC12DL040CIVS - Dual 12-Bit 40 MSPS 3V ADC | Texas Instruments
ADC12DL040CIVS NrndTexas Instruments
ADC12040CIVY - 12-Bit 40MSPS Pipelined ADC | Texas Instruments
ADC12040CIVY ✓ AktivSpezifikationsvergleich
| Parameter | ADC12DL040CIVS | ADC12040CIVY |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | ADC/DAC | ADC/DAC |
| Lebenszyklusstatus | NRND | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $11,85 | $5,52 |
| Auflösung | 12 Bits | 12 bit |
| Number of Channels | 2 (dual, simultaneous sampling) | 1 input |
| Sample Rate (per channel) | 40 MSPS | — |
| Architecture | Pipelined CMOS | Pipelined |
| Analog Supply Voltage | 3.0 V (2.7 V to 3.6 V range) | — |
| Digital Output Driver Supply | 2.4 V to 3.6 V (separate DVDD) | — |
| Power Dissipation (typical) | 210 mW | — |
| Power-Down Mode | Yes | — |
| SNR (fIN = 10 MHz) | 69 dB (typical) | — |
| SFDR (fIN = 10 MHz) | 85 dB (typical) | — |
| DNL (Differential Non-Linearity) | ±0.3 LSB (typical) | — |
| INL (Integral Non-Linearity) | [DATA_NEEDED: INL spec] | — |
| Internal Reference | Yes (factory-trimmed, not user-adjustable) | — |
| Sample-and-Hold | Internal, dual | — |
| Duty Cycle Stabilizer | Yes | — |
| Multiplexed Output Mode | Yes (channels share single 12-bit bus) | — |
| Output Format | Straight Binary, offset binary, 2's complement (per pin strapping) | — |
| Input Clock | Single-ended or differential; 50 Ω terminated internally | — |
| Betriebstemperatur | -40 °C to +85 °C (industrial) | — |
| Gehäuse | 64-pin TQFP (PAG) 10x10 mm, surface-mount | 32-LQFP (NEY) 7x7 mm |
| MSL (Moisture Sensitivity Level) | [DATA_NEEDED: MSL level] | — |
| Lead Finish / RoHS | Lead-free / RoHS status depends on orderable suffix (see datasheet ordering info) | — |
| Abtastrate | — | 40 MSPS (min 40 MSPS over temperature) |
| Versorgungsspannung | — | +5V ±5% (single supply) |
| Power Consumption | — | 340 mW (typ) at 40 MHz |
| Differential Non-Linearity (DNL) | — | ±0.4 LSB (typ) |
| Signal-to-Noise Ratio (SNR) | — | 69 dB (typ) at fIN = 10 MHz |
| Effective Number of Bits (ENOB) | — | 11.2 bits (typ) at fIN = 10 MHz |
| Input Type | — | Differential (single-ended capable) |
| Reference Type | — | External, with internal buffer |
| Digital Output Interface | — | Parallel, CMOS, straight binary |
| Digital Output Logic Levels | — | 2.35V to 5V compatible |
| Power Down Mode | — | On-chip (low quiescent between conversions) |
| Betriebstemperaturbereich | — | -40C to +85C (industrial) |
| Montageart | — | Surface Mount |
| Pin Family Compatibility | — | Pin compatible with ADC12010, ADC12020, ADC12L063, ADC12L066 |
| RoHS-Status | — | Compliant (NOPB suffix variants only; check exact suffix) |