ADM236LJR vs ADM237LJR Vergleich
Detaillierter Direktvergleich von ADM236LJR von Analog Devices und ADM237LJR von Analog Devices. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | ADM236LJR | ADM237LJR |
|---|---|---|
| Marke | Analog Devices | Analog Devices |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Product Type | +5 V powered CMOS RS-232 drivers/receivers | RS-232 driver/receiver transceiver |
| Versorgungsspannung | 5 V | 5 V |
| Maximum Data Rate | 120 kB/s | 120 kB/s |
| Driver Count | 3 | — |
| Receiver Count | 3 | — |
| Supported Standards | EIA-232-E and V.28 | — |
| DC-DC Converter | On-board | — |
| RS-232 Output Swing | 9 V | 9 V |
| Driver Signal Level | Approximately ±5 V at data rates up to 100 kbps under worst-case loading | — |
| Charge-Pump Capacitor | 1 µF | 1 µF |
| Shutdown Power Dissipation | Less than 5 µW | — |
| Receivers Active During Shutdown | 2 | — |
| Maximum Receiver Input Voltage | 30 V | — |
| Gehäuse | 20-pin SOIC | 24-SOIC |
| Montageart | Surface mount | Surface mount |
| RoHS-Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | [DATA_NEEDED: AEC-Q100 qualification] |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Transceiver Functions | 3 drivers and 3 receivers | — |
| Supplier | Rochester Electronics, LLC | — |
| Number of Drivers | — | 5 |
| Number of Receivers | — | 3 |
| Operating Supply Range | — | 4.75 V to 5.25 V |
| Receiver Maximum Input Voltage | — | 30 V |
| Shutdown Feature | — | Low-power shutdown with receivers active |
| Interface Compliance | — | EIA-232-E and V.28 |
| Package Width | — | 7.50 mm |
| Lead Finish | — | [DATA_NEEDED: lead finish] |