ADM236LJR vs ADM237LJR Сравнение
Подробное сравнение бок о бок ADM236LJR от Analog Devices и ADM237LJR от Analog Devices. Сравните ключевые характеристики, электрические параметры, упаковку, статус жизненного цикла, цены и наличие, чтобы выбрать лучший компонент для ваших требований.
Сравнение характеристик
| Параметр | ADM236LJR | ADM237LJR |
|---|---|---|
| Бренд | Analog Devices | Analog Devices |
| Категория | Interface ICs | Interface ICs |
| Статус жизненного цикла | Активен | Активен |
| Product Type | +5 V powered CMOS RS-232 drivers/receivers | RS-232 driver/receiver transceiver |
| Напряжение питания | 5 V | 5 V |
| Maximum Data Rate | 120 kB/s | 120 kB/s |
| Driver Count | 3 | — |
| Receiver Count | 3 | — |
| Supported Standards | EIA-232-E and V.28 | — |
| DC-DC Converter | On-board | — |
| RS-232 Output Swing | 9 V | 9 V |
| Driver Signal Level | Approximately ±5 V at data rates up to 100 kbps under worst-case loading | — |
| Charge-Pump Capacitor | 1 µF | 1 µF |
| Shutdown Power Dissipation | Less than 5 µW | — |
| Receivers Active During Shutdown | 2 | — |
| Maximum Receiver Input Voltage | 30 V | — |
| Корпус | 20-pin SOIC | 24-SOIC |
| Тип монтажа | Surface mount | Surface mount |
| Статус RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | [DATA_NEEDED: AEC-Q100 qualification] |
| Диапазон рабочих температур | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Transceiver Functions | 3 drivers and 3 receivers | — |
| Supplier | Rochester Electronics, LLC | — |
| Number of Drivers | — | 5 |
| Number of Receivers | — | 3 |
| Operating Supply Range | — | 4.75 V to 5.25 V |
| Receiver Maximum Input Voltage | — | 30 V |
| Shutdown Feature | — | Low-power shutdown with receivers active |
| Interface Compliance | — | EIA-232-E and V.28 |
| Package Width | — | 7.50 mm |
| Lead Finish | — | [DATA_NEEDED: lead finish] |