ADM236LJR vs ADM237LJR Perbandingan
Perbandingan bersamaan detil ADM236LJR dari Analog Devices dan ADM237LJR dari Analog Devices. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | ADM236LJR | ADM237LJR |
|---|---|---|
| Merek | Analog Devices | Analog Devices |
| Kategori | Interface ICs | Interface ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Type | +5 V powered CMOS RS-232 drivers/receivers | RS-232 driver/receiver transceiver |
| Tegangan Pemuat | 5 V | 5 V |
| Maximum Data Rate | 120 kB/s | 120 kB/s |
| Driver Count | 3 | — |
| Receiver Count | 3 | — |
| Supported Standards | EIA-232-E and V.28 | — |
| DC-DC Converter | On-board | — |
| RS-232 Output Swing | 9 V | 9 V |
| Driver Signal Level | Approximately ±5 V at data rates up to 100 kbps under worst-case loading | — |
| Charge-Pump Capacitor | 1 µF | 1 µF |
| Shutdown Power Dissipation | Less than 5 µW | — |
| Receivers Active During Shutdown | 2 | — |
| Maximum Receiver Input Voltage | 30 V | — |
| Paket | 20-pin SOIC | 24-SOIC |
| Tipe Mounting | Surface mount | Surface mount |
| Status RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | [DATA_NEEDED: AEC-Q100 qualification] |
| Rentang Suhu Kerja | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Transceiver Functions | 3 drivers and 3 receivers | — |
| Supplier | Rochester Electronics, LLC | — |
| Number of Drivers | — | 5 |
| Number of Receivers | — | 3 |
| Operating Supply Range | — | 4.75 V to 5.25 V |
| Receiver Maximum Input Voltage | — | 30 V |
| Shutdown Feature | — | Low-power shutdown with receivers active |
| Interface Compliance | — | EIA-232-E and V.28 |
| Package Width | — | 7.50 mm |
| Lead Finish | — | [DATA_NEEDED: lead finish] |