ADM4851ARZ vs MC3486NSR Vergleich
Detaillierter Direktvergleich von ADM4851ARZ von Analog Devices und MC3486NSR von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Analog Devices
ADM4851ARZ - 500 kbps Half-Duplex RS-485 Transceiver | Analog Devices
ADM4851ARZ ✓ AktivTexas Instruments
MC3486NSR - Quad Differential RS-422/423 Receiver | Texas Instruments (Tape & Reel)
MC3486NSR ✓ AktivSpezifikationsvergleich
| Parameter | ADM4851ARZ | MC3486NSR |
|---|---|---|
| Marke | Analog Devices | Texas Instruments |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Product Type | RS-485/RS-422 differential line transceiver | — |
| Versorgungsspannung | 5 V | 5 V single supply |
| Maximum Data Rate | 500 kbps | — |
| Duplex Mode | Half-duplex | — |
| Supported Standards | EIA RS-485 and EIA RS-422 | — |
| Driver Configuration | 1/1 transceiver | — |
| Slew Rate | Limited | — |
| Signal Type | Balanced differential | — |
| Gehäuse | 8-pin SOIC | 16-pin SOIC |
| Montageart | Surface mount | Surface mount |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | 0 C to 70 C |
| Versorgungsstrom | [DATA_NEEDED: supply current] | — |
| Receiver Common-Mode Voltage Range | [DATA_NEEDED: receiver common-mode voltage range] | — |
| Differential Input Sensitivity | [DATA_NEEDED: differential input sensitivity] | — |
| Driver Output Current | [DATA_NEEDED: driver output current] | — |
| Abschaltstrom | [DATA_NEEDED: shutdown current] | — |
| Lead Pitch | [DATA_NEEDED: lead pitch] | — |
| RoHS-Status | unknown | [DATA_NEEDED: RoHS status] |
| REACH Status | unknown | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | not_applicable | — |
| Receiver Type | — | Quadruple differential line receiver |
| Number of Receiver Channels | — | 4 channels |
| Independent Differential Inputs | — | 4 independent differential-input pairs |
| Ausgangstyp | — | TTL-compatible, 3-state |
| Input Standard Compatibility | — | TIA/EIA-422-B and TIA/EIA-423-B |
| ITU Recommendation Compatibility | — | ITU V.10 and V.11 |
| Device Type | — | Line receiver |
| Logic Compatibility | — | TTL-compatible |
| High-Impedance Output State | — | Available through 3-state output circuitry |
| Recommended Companion Driver | — | MC3487 family |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |
| Input Differential Voltage Range | — | [DATA_NEEDED: input differential voltage range] |
| Maximum Input Voltage | — | [DATA_NEEDED: maximum input voltage] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |