ADM4851ARZ vs MC3486NSR Perbandingan
Perbandingan bersamaan detil ADM4851ARZ dari Analog Devices dan MC3486NSR dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Analog Devices
ADM4851ARZ - 500 kbps Half-Duplex RS-485 Transceiver | Analog Devices
ADM4851ARZ ✓ AktifTexas Instruments
MC3486NSR - Quad Differential RS-422/423 Receiver | Texas Instruments (Tape & Reel)
MC3486NSR ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | ADM4851ARZ | MC3486NSR |
|---|---|---|
| Merek | Analog Devices | Texas Instruments |
| Kategori | Interface ICs | Interface ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Type | RS-485/RS-422 differential line transceiver | — |
| Tegangan Pemuat | 5 V | 5 V single supply |
| Maximum Data Rate | 500 kbps | — |
| Duplex Mode | Half-duplex | — |
| Supported Standards | EIA RS-485 and EIA RS-422 | — |
| Driver Configuration | 1/1 transceiver | — |
| Slew Rate | Limited | — |
| Signal Type | Balanced differential | — |
| Paket | 8-pin SOIC | 16-pin SOIC |
| Tipe Mounting | Surface mount | Surface mount |
| Rentang Suhu Kerja | [DATA_NEEDED: operating temperature range] | 0 C to 70 C |
| Arus Pemuat | [DATA_NEEDED: supply current] | — |
| Receiver Common-Mode Voltage Range | [DATA_NEEDED: receiver common-mode voltage range] | — |
| Differential Input Sensitivity | [DATA_NEEDED: differential input sensitivity] | — |
| Driver Output Current | [DATA_NEEDED: driver output current] | — |
| Arus Menutup | [DATA_NEEDED: shutdown current] | — |
| Lead Pitch | [DATA_NEEDED: lead pitch] | — |
| Status RoHS | unknown | [DATA_NEEDED: RoHS status] |
| REACH Status | unknown | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | not_applicable | — |
| Receiver Type | — | Quadruple differential line receiver |
| Number of Receiver Channels | — | 4 channels |
| Independent Differential Inputs | — | 4 independent differential-input pairs |
| Tipe Output | — | TTL-compatible, 3-state |
| Input Standard Compatibility | — | TIA/EIA-422-B and TIA/EIA-423-B |
| ITU Recommendation Compatibility | — | ITU V.10 and V.11 |
| Device Type | — | Line receiver |
| Logic Compatibility | — | TTL-compatible |
| High-Impedance Output State | — | Available through 3-state output circuitry |
| Recommended Companion Driver | — | MC3487 family |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |
| Input Differential Voltage Range | — | [DATA_NEEDED: input differential voltage range] |
| Maximum Input Voltage | — | [DATA_NEEDED: maximum input voltage] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |