ADM485ANZ vs ADM485ARZ Vergleich
Detaillierter Direktvergleich von ADM485ANZ von Analog Devices und ADM485ARZ von Analog Devices. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Analog Devices
ADM485ARZ - 5V 5Mbps Half-Duplex RS-485/RS-422 Transceiver | Analog Devices (Tape & Reel)
ADM485ARZ ✓ AktivSpezifikationsvergleich
| Parameter | ADM485ANZ | ADM485ARZ |
|---|---|---|
| Marke | Analog Devices | Analog Devices |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Product Type | Differential RS-485/RS-422 line transceiver | — |
| Versorgungsspannung | 5 V | 5 V (single supply) |
| Maximum Data Rate | 5 Mbit/s | — |
| Transceiver Configuration | 1 transmitter and 1 receiver | — |
| Communication Standard | EIA RS-485 and RS-422 | — |
| Bus Architecture | Bidirectional multipoint bus | — |
| Signal Type | Balanced differential | — |
| Gehäuse | 8-pin PDIP | SOIC-8 (SO-8) / SO-8 |
| Montageart | Through-hole | Surface Mount |
| Temperature Range | Commercial and industrial | — |
| Power Class | Low-power | — |
| Driver Propagation Delay | [DATA_NEEDED: driver propagation delay] | — |
| Receiver Propagation Delay | [DATA_NEEDED: receiver propagation delay] | — |
| Differential Input Sensitivity | [DATA_NEEDED: differential input sensitivity] | — |
| Common-Mode Rejection | [DATA_NEEDED: common-mode rejection] | — |
| Driver Output Current | [DATA_NEEDED: driver output current] | — |
| Versorgungsstrom | [DATA_NEEDED: supply current] | — |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | -40 C to +85 C |
| RoHS-Status | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | Unaffected |
| Type | — | Transceiver |
| Protocol | — | RS-422, RS-485 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Half |
| Datenrate | — | 5 Mbps (max) |
| Receiver Hysteresis | — | [DATA_NEEDED: receiver hysteresis] |
| Common-Mode Range | — | -7 V to +12 V |
| Driver Differential Output | — | [DATA_NEEDED: VOD min/max] |
| ESD Protection | — | [DATA_NEEDED: ESD HBM rating] |
| MSL-Level | — | 1 (Unlimited) |
| Compliance | — | ROHS3 Compliant |
| Enable Pins | — | Yes (DE driver enable, RE receiver enable, active-low/GPIO logic) |