ADM485ANZ vs ADM485ARZ Comparação
Comparação detalhada lado a lado de ADM485ANZ por Analog Devices e ADM485ARZ por Analog Devices. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
Analog Devices
ADM485ARZ - 5V 5Mbps Half-Duplex RS-485/RS-422 Transceiver | Analog Devices (Tape & Reel)
ADM485ARZ ✓ AtivoComparação de especificações
| Parâmetro | ADM485ANZ | ADM485ARZ |
|---|---|---|
| Marca | Analog Devices | Analog Devices |
| Categoria | Interface ICs | Interface ICs |
| Status do ciclo de vida | Ativo | Ativo |
| Product Type | Differential RS-485/RS-422 line transceiver | — |
| Tensão de alimentação | 5 V | 5 V (single supply) |
| Maximum Data Rate | 5 Mbit/s | — |
| Transceiver Configuration | 1 transmitter and 1 receiver | — |
| Communication Standard | EIA RS-485 and RS-422 | — |
| Bus Architecture | Bidirectional multipoint bus | — |
| Signal Type | Balanced differential | — |
| Encapsulamento | 8-pin PDIP | SOIC-8 (SO-8) / SO-8 |
| Tipo de montagem | Through-hole | Surface Mount |
| Temperature Range | Commercial and industrial | — |
| Power Class | Low-power | — |
| Driver Propagation Delay | [DATA_NEEDED: driver propagation delay] | — |
| Receiver Propagation Delay | [DATA_NEEDED: receiver propagation delay] | — |
| Differential Input Sensitivity | [DATA_NEEDED: differential input sensitivity] | — |
| Common-Mode Rejection | [DATA_NEEDED: common-mode rejection] | — |
| Driver Output Current | [DATA_NEEDED: driver output current] | — |
| Corrente de alimentação | [DATA_NEEDED: supply current] | — |
| Faixa de temperatura de operação | [DATA_NEEDED: operating temperature range] | -40 C to +85 C |
| Status RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | Unaffected |
| Type | — | Transceiver |
| Protocol | — | RS-422, RS-485 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Half |
| Taxa de dados | — | 5 Mbps (max) |
| Receiver Hysteresis | — | [DATA_NEEDED: receiver hysteresis] |
| Common-Mode Range | — | -7 V to +12 V |
| Driver Differential Output | — | [DATA_NEEDED: VOD min/max] |
| ESD Protection | — | [DATA_NEEDED: ESD HBM rating] |
| Nível MSL | — | 1 (Unlimited) |
| Compliance | — | ROHS3 Compliant |
| Enable Pins | — | Yes (DE driver enable, RE receiver enable, active-low/GPIO logic) |