ADM485ANZ vs ADM485ARZ Perbandingan
Perbandingan bersamaan detil ADM485ANZ dari Analog Devices dan ADM485ARZ dari Analog Devices. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Analog Devices
ADM485ARZ - 5V 5Mbps Half-Duplex RS-485/RS-422 Transceiver | Analog Devices (Tape & Reel)
ADM485ARZ ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | ADM485ANZ | ADM485ARZ |
|---|---|---|
| Merek | Analog Devices | Analog Devices |
| Kategori | Interface ICs | Interface ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Type | Differential RS-485/RS-422 line transceiver | — |
| Tegangan Pemuat | 5 V | 5 V (single supply) |
| Maximum Data Rate | 5 Mbit/s | — |
| Transceiver Configuration | 1 transmitter and 1 receiver | — |
| Communication Standard | EIA RS-485 and RS-422 | — |
| Bus Architecture | Bidirectional multipoint bus | — |
| Signal Type | Balanced differential | — |
| Paket | 8-pin PDIP | SOIC-8 (SO-8) / SO-8 |
| Tipe Mounting | Through-hole | Surface Mount |
| Temperature Range | Commercial and industrial | — |
| Power Class | Low-power | — |
| Driver Propagation Delay | [DATA_NEEDED: driver propagation delay] | — |
| Receiver Propagation Delay | [DATA_NEEDED: receiver propagation delay] | — |
| Differential Input Sensitivity | [DATA_NEEDED: differential input sensitivity] | — |
| Common-Mode Rejection | [DATA_NEEDED: common-mode rejection] | — |
| Driver Output Current | [DATA_NEEDED: driver output current] | — |
| Arus Pemuat | [DATA_NEEDED: supply current] | — |
| Rentang Suhu Kerja | [DATA_NEEDED: operating temperature range] | -40 C to +85 C |
| Status RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | Unaffected |
| Type | — | Transceiver |
| Protocol | — | RS-422, RS-485 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Half |
| Laju Data | — | 5 Mbps (max) |
| Receiver Hysteresis | — | [DATA_NEEDED: receiver hysteresis] |
| Common-Mode Range | — | -7 V to +12 V |
| Driver Differential Output | — | [DATA_NEEDED: VOD min/max] |
| ESD Protection | — | [DATA_NEEDED: ESD HBM rating] |
| Level MSL | — | 1 (Unlimited) |
| Compliance | — | ROHS3 Compliant |
| Enable Pins | — | Yes (DE driver enable, RE receiver enable, active-low/GPIO logic) |