ADM485ARZ vs ADM485JRZ Vergleich
Detaillierter Direktvergleich von ADM485ARZ von Analog Devices und ADM485JRZ von Analog Devices. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Analog Devices
ADM485ARZ - 5V 5Mbps Half-Duplex RS-485/RS-422 Transceiver | Analog Devices (Tape & Reel)
ADM485ARZ ✓ AktivSpezifikationsvergleich
| Parameter | ADM485ARZ | ADM485JRZ |
|---|---|---|
| Marke | Analog Devices | Analog Devices |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Type | Transceiver | — |
| Protocol | RS-422, RS-485 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half | — |
| Versorgungsspannung | 5 V (single supply) | — |
| Datenrate | 5 Mbps (max) | — |
| Receiver Hysteresis | [DATA_NEEDED: receiver hysteresis] | — |
| Common-Mode Range | -7 V to +12 V | — |
| Driver Differential Output | [DATA_NEEDED: VOD min/max] | — |
| Betriebstemperaturbereich | -40 C to +85 C | [DATA_NEEDED: operating temperature range] |
| Gehäuse | SOIC-8 (SO-8) / SO-8 | 8-pin SOIC |
| Montageart | Surface Mount | Surface mount |
| ESD Protection | [DATA_NEEDED: ESD HBM rating] | — |
| RoHS-Status | Compliant | [DATA_NEEDED: RoHS status] |
| REACH Status | Unaffected | [DATA_NEEDED: REACH status] |
| MSL-Level | 1 (Unlimited) | — |
| Compliance | ROHS3 Compliant | — |
| Enable Pins | Yes (DE driver enable, RE receiver enable, active-low/GPIO logic) | — |
| Product Type | — | RS-485/RS-422 differential line transceiver |
| Supply Voltage Range | — | 4.75 V to 5.25 V |
| Maximum Data Rate | — | 5 Mbits/s |
| Communication Mode | — | Half-duplex |
| Supported Standards | — | EIA RS-485 and RS-422 |
| Driver Output Count | — | 1 differential driver |
| Receiver Input Count | — | 1 differential receiver |
| Driver and Receiver Control | — | Independently enabled |
| Temperature Grade | — | Commercial and industrial temperature range |
| Propagation Delay | — | [DATA_NEEDED: driver and receiver propagation delay] |
| Ruhestrom | — | [DATA_NEEDED: quiescent current] |
| Versorgungsstrom | — | [DATA_NEEDED: driver and receiver supply current] |
| Common-Mode Voltage Range | — | [DATA_NEEDED: receiver common-mode voltage range] |
| Driver Output Differential Voltage | — | [DATA_NEEDED: driver output differential voltage] |