ADM485ARZ vs ADM485JRZ 比較
詳細な並列比較: ADM485ARZ メーカー: Analog Devices および ADM485JRZ メーカー: Analog Devices。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
Analog Devices
ADM485ARZ - 5V 5Mbps Half-Duplex RS-485/RS-422 Transceiver | Analog Devices (Tape & Reel)
ADM485ARZ ✓ 生産中仕様比較
| パラメータ | ADM485ARZ | ADM485JRZ |
|---|---|---|
| ブランド | Analog Devices | Analog Devices |
| カテゴリ | Interface ICs | Interface ICs |
| ライフサイクル状態 | 有効 | 有効 |
| Type | Transceiver | — |
| Protocol | RS-422, RS-485 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half | — |
| 電源電圧 | 5 V (single supply) | — |
| データレート | 5 Mbps (max) | — |
| Receiver Hysteresis | [DATA_NEEDED: receiver hysteresis] | — |
| Common-Mode Range | -7 V to +12 V | — |
| Driver Differential Output | [DATA_NEEDED: VOD min/max] | — |
| 動作温度範囲 | -40 C to +85 C | [DATA_NEEDED: operating temperature range] |
| パッケージ | SOIC-8 (SO-8) / SO-8 | 8-pin SOIC |
| 実装タイプ | Surface Mount | Surface mount |
| ESD Protection | [DATA_NEEDED: ESD HBM rating] | — |
| RoHS ステータス | Compliant | [DATA_NEEDED: RoHS status] |
| REACH Status | Unaffected | [DATA_NEEDED: REACH status] |
| MSLレベル | 1 (Unlimited) | — |
| Compliance | ROHS3 Compliant | — |
| Enable Pins | Yes (DE driver enable, RE receiver enable, active-low/GPIO logic) | — |
| Product Type | — | RS-485/RS-422 differential line transceiver |
| Supply Voltage Range | — | 4.75 V to 5.25 V |
| Maximum Data Rate | — | 5 Mbits/s |
| Communication Mode | — | Half-duplex |
| Supported Standards | — | EIA RS-485 and RS-422 |
| Driver Output Count | — | 1 differential driver |
| Receiver Input Count | — | 1 differential receiver |
| Driver and Receiver Control | — | Independently enabled |
| Temperature Grade | — | Commercial and industrial temperature range |
| Propagation Delay | — | [DATA_NEEDED: driver and receiver propagation delay] |
| 静止電流 | — | [DATA_NEEDED: quiescent current] |
| 電源電流 | — | [DATA_NEEDED: driver and receiver supply current] |
| Common-Mode Voltage Range | — | [DATA_NEEDED: receiver common-mode voltage range] |
| Driver Output Differential Voltage | — | [DATA_NEEDED: driver output differential voltage] |