ADM485ARZ vs ADM485JRZ 비교
다음의 상세 나란히 비교: ADM485ARZ 제조: Analog Devices 및 ADM485JRZ 제조: Analog Devices. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
Analog Devices
ADM485ARZ - 5V 5Mbps Half-Duplex RS-485/RS-422 Transceiver | Analog Devices (Tape & Reel)
ADM485ARZ ✓ 활성사양 비교
| 파라미터 | ADM485ARZ | ADM485JRZ |
|---|---|---|
| 브랜드 | Analog Devices | Analog Devices |
| 카테고리 | Interface ICs | Interface ICs |
| 수명 주기 상태 | 활성 | 활성 |
| Type | Transceiver | — |
| Protocol | RS-422, RS-485 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half | — |
| 공급 전압 | 5 V (single supply) | — |
| 데이터 속도 | 5 Mbps (max) | — |
| Receiver Hysteresis | [DATA_NEEDED: receiver hysteresis] | — |
| Common-Mode Range | -7 V to +12 V | — |
| Driver Differential Output | [DATA_NEEDED: VOD min/max] | — |
| 동작 온도 범위 | -40 C to +85 C | [DATA_NEEDED: operating temperature range] |
| 패키지 | SOIC-8 (SO-8) / SO-8 | 8-pin SOIC |
| 실장 유형 | Surface Mount | Surface mount |
| ESD Protection | [DATA_NEEDED: ESD HBM rating] | — |
| RoHS 상태 | Compliant | [DATA_NEEDED: RoHS status] |
| REACH Status | Unaffected | [DATA_NEEDED: REACH status] |
| MSL 레벨 | 1 (Unlimited) | — |
| Compliance | ROHS3 Compliant | — |
| Enable Pins | Yes (DE driver enable, RE receiver enable, active-low/GPIO logic) | — |
| Product Type | — | RS-485/RS-422 differential line transceiver |
| Supply Voltage Range | — | 4.75 V to 5.25 V |
| Maximum Data Rate | — | 5 Mbits/s |
| Communication Mode | — | Half-duplex |
| Supported Standards | — | EIA RS-485 and RS-422 |
| Driver Output Count | — | 1 differential driver |
| Receiver Input Count | — | 1 differential receiver |
| Driver and Receiver Control | — | Independently enabled |
| Temperature Grade | — | Commercial and industrial temperature range |
| Propagation Delay | — | [DATA_NEEDED: driver and receiver propagation delay] |
| 대기 전류 | — | [DATA_NEEDED: quiescent current] |
| 공급 전류 | — | [DATA_NEEDED: driver and receiver supply current] |
| Common-Mode Voltage Range | — | [DATA_NEEDED: receiver common-mode voltage range] |
| Driver Output Differential Voltage | — | [DATA_NEEDED: driver output differential voltage] |