ADS7844N vs MAX147AEAP+TG05 Vergleich
Detaillierter Direktvergleich von ADS7844N von Texas Instruments und MAX147AEAP+TG05 von Analog Devices. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | ADS7844N | MAX147AEAP+TG05 |
|---|---|---|
| Marke | Texas Instruments | Analog Devices |
| Kategorie | ADC/DAC | ADC/DAC |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Auflösung | 12 bit | 12 bits |
| Number of Channels | 8 channels | — |
| Input Configuration | 8 single-ended or 4 differential inputs | — |
| Conversion Rate | 200 kHz | 133 ksps max |
| Versorgungsspannung | Single supply, +5 V typical application | — |
| Reference Voltage Range | 100 mV to VCC | — |
| Eingangsspannungsbereich | 0 V to VREF | 0 to VREF (unipolar) or ±VREF (bipolar) |
| Typical Power Dissipation | 3 mW at 200 kHz throughput and +5 V supply | — |
| Schnittstelle | Synchronous serial interface | — |
| ADC Architecture | Sampling SAR ADC | — |
| Shutdown Mode | Yes | — |
| Gehäuse | 20-pin SSOP | 20-pin SSOP |
| Montageart | Surface mount | Surface Mount |
| Ausgangstyp | Serial output | — |
| Product Description | 12-bit, 8-channel serial-output sampling ADC | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | -40 C to +85 C (E grade, AEAP) |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Number of Input Channels | — | 8 single-ended / 4 differential |
| Converter Architecture | — | SAR (Successive Approximation Register) |
| Analog Input Modes | — | Single-ended or differential, software-selectable |
| Supply Voltage (VDD) | — | +2.7 V to +3.6 V |
| Operating Supply Current | — | 1.2 mA typ |
| Power-Down Current | — | 1 µA typ |
| Internal Reference | — | +2.5 V, internal |
| External Reference Input | — | Yes, VREF pin overdrivable |
| Serial Interface | — | SPI / QSPI / MICROWIRE compatible |
| Integral Nonlinearity (INL) | — | [DATA_NEEDED: INL value, typical ±1 LSB max per datasheet family] |
| Differential Nonlinearity (DNL) | — | ±1 LSB, no missing codes |
| Track/Hold Bandwidth | — | High bandwidth, per datasheet |
| Shutdown Pin | — | Yes, hard-wired active-low SHDN-bar |
| Software Power-Down | — | Yes, selectable via serial interface |
| Auto-Shutdown End of Conversion | — | Yes, programmable |
| MSL-Level | — | 1 per SSOP JEDEC J-STD-020 |