ADS7844N vs MAX147AEAP+TG05 Comparaison

Comparaison détaillée côte à côte de ADS7844N par Texas Instruments et MAX147AEAP+TG05 par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Texas Instruments
ADS7844N ADS7844N - 12-Bit 8-Channel SAR ADC | Texas Instruments

ADS7844N - 12-Bit 8-Channel SAR ADC | Texas Instruments

ADS7844N ✓ Actif
Analog Devices
MAX147AEAP+TG05 MAX147AEAP+TG05 - 12-Bit 8-Ch Serial ADC, SSOP-20 | Maxim

MAX147AEAP+TG05 - 12-Bit 8-Ch Serial ADC, SSOP-20 | Maxim

MAX147AEAP+TG05 ✓ Actif

Comparaison des spécifications

Paramètre ADS7844N MAX147AEAP+TG05
Marque Texas Instruments Analog Devices
Catégorie ADC/DAC ADC/DAC
Statut du cycle de vie Actif Actif
Résolution 12 bit 12 bits
Number of Channels 8 channels —
Input Configuration 8 single-ended or 4 differential inputs —
Conversion Rate 200 kHz 133 ksps max
Tension d'alimentation Single supply, +5 V typical application —
Reference Voltage Range 100 mV to VCC —
Plage de tension d'entrée 0 V to VREF 0 to VREF (unipolar) or ±VREF (bipolar)
Typical Power Dissipation 3 mW at 200 kHz throughput and +5 V supply —
Interface Synchronous serial interface —
ADC Architecture Sampling SAR ADC —
Shutdown Mode Yes —
Boîtier 20-pin SSOP 20-pin SSOP
Type de montage Surface mount Surface Mount
Type de sortie Serial output —
Product Description 12-bit, 8-channel serial-output sampling ADC —
Statut RoHS [DATA_NEEDED: RoHS status] Compliant
REACH Status [DATA_NEEDED: REACH status] —
Plage de température de fonctionnement [DATA_NEEDED: operating temperature range] -40 C to +85 C (E grade, AEAP)
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification status] —
Number of Input Channels — 8 single-ended / 4 differential
Converter Architecture — SAR (Successive Approximation Register)
Analog Input Modes — Single-ended or differential, software-selectable
Supply Voltage (VDD) — +2.7 V to +3.6 V
Operating Supply Current — 1.2 mA typ
Power-Down Current — 1 µA typ
Internal Reference — +2.5 V, internal
External Reference Input — Yes, VREF pin overdrivable
Serial Interface — SPI / QSPI / MICROWIRE compatible
Integral Nonlinearity (INL) — [DATA_NEEDED: INL value, typical ±1 LSB max per datasheet family]
Differential Nonlinearity (DNL) — ±1 LSB, no missing codes
Track/Hold Bandwidth — High bandwidth, per datasheet
Shutdown Pin — Yes, hard-wired active-low SHDN-bar
Software Power-Down — Yes, selectable via serial interface
Auto-Shutdown End of Conversion — Yes, programmable
Niveau MSL — 1 per SSOP JEDEC J-STD-020

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis