ADS7844N vs MAX147AEAP+TG05 So sánh

So sánh chi tiết song song của ADS7844N bằng Texas Instruments và MAX147AEAP+TG05 bằng Analog Devices. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Texas Instruments
ADS7844N ADS7844N - 12-Bit 8-Channel SAR ADC | Texas Instruments

ADS7844N - 12-Bit 8-Channel SAR ADC | Texas Instruments

ADS7844N ✓ Hoạt động
Analog Devices
MAX147AEAP+TG05 MAX147AEAP+TG05 - 12-Bit 8-Ch Serial ADC, SSOP-20 | Maxim

MAX147AEAP+TG05 - 12-Bit 8-Ch Serial ADC, SSOP-20 | Maxim

MAX147AEAP+TG05 ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số ADS7844N MAX147AEAP+TG05
Thương hiệu Texas Instruments Analog Devices
Danh mục ADC/DAC ADC/DAC
Trạng thái vòng đời Hoạt động Hoạt động
Độ phân giải 12 bit 12 bits
Number of Channels 8 channels —
Input Configuration 8 single-ended or 4 differential inputs —
Conversion Rate 200 kHz 133 ksps max
Điện áp cung cấp Single supply, +5 V typical application —
Reference Voltage Range 100 mV to VCC —
Phạm vi điện áp đầu vào 0 V to VREF 0 to VREF (unipolar) or ±VREF (bipolar)
Typical Power Dissipation 3 mW at 200 kHz throughput and +5 V supply —
Giao diện Synchronous serial interface —
ADC Architecture Sampling SAR ADC —
Shutdown Mode Yes —
Hộp 20-pin SSOP 20-pin SSOP
Kiểu lắp đặt Surface mount Surface Mount
Kiểu đầu ra Serial output —
Product Description 12-bit, 8-channel serial-output sampling ADC —
Trạng thái RoHS [DATA_NEEDED: RoHS status] Compliant
REACH Status [DATA_NEEDED: REACH status] —
Khoảng nhiệt độ hoạt động [DATA_NEEDED: operating temperature range] -40 C to +85 C (E grade, AEAP)
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification status] —
Number of Input Channels — 8 single-ended / 4 differential
Converter Architecture — SAR (Successive Approximation Register)
Analog Input Modes — Single-ended or differential, software-selectable
Supply Voltage (VDD) — +2.7 V to +3.6 V
Operating Supply Current — 1.2 mA typ
Power-Down Current — 1 µA typ
Internal Reference — +2.5 V, internal
External Reference Input — Yes, VREF pin overdrivable
Serial Interface — SPI / QSPI / MICROWIRE compatible
Integral Nonlinearity (INL) — [DATA_NEEDED: INL value, typical ±1 LSB max per datasheet family]
Differential Nonlinearity (DNL) — ±1 LSB, no missing codes
Track/Hold Bandwidth — High bandwidth, per datasheet
Shutdown Pin — Yes, hard-wired active-low SHDN-bar
Software Power-Down — Yes, selectable via serial interface
Auto-Shutdown End of Conversion — Yes, programmable
Cấp MSL — 1 per SSOP JEDEC J-STD-020

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá