BSP742RIXUMA1 vs BTS428L2ATMA1 Vergleich
Detaillierter Direktvergleich von BSP742RIXUMA1 von Infineon und BTS428L2ATMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | BSP742RIXUMA1 | BTS428L2ATMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,96 | $1,45 |
| Product Type | Smart High-Side Power Switch | Smart High-Side Power Switch |
| Topologie | 1:1 N-Channel High-Side | — |
| Family | miniPROFET | — |
| Output Current (Nominal) | 400 mA | — |
| RDS(on) Typical at 25°C | 250 mΩ | — |
| Betriebsversorgungsspannung | 5 V to 34 V | [DATA_NEEDED: nominal and range] |
| Load Dump Tolerance | 41 V | — |
| Reverse Battery Protection | -16 V | — |
| On-State Resistance (max) | [DATA_NEEDED: RDS(on) maximum at 25°C] | — |
| Strombegrenzung | [DATA_NEEDED: current limit typical value] | — |
| Thermisches Abschalten | Yes with auto restart | — |
| Overvoltage Protection | Yes (including load dump) | Load-dump / overvoltage clamp |
| Short Circuit Protection | Yes | — |
| Open Load Detection | Yes (diagnostic pin) | — |
| Demagnetization of Inductive Loads | Yes (internal) | — |
| Gehäuse | PG-DSO-8-6 (SOIC-8, 3.90 mm body) | PG-TO252-5-11 (DPAK-5, 4 leads + tab) |
| Montageart | Surface Mount | Surface Mount |
| Betriebstemperaturbereich | -40 °C to +150 °C | [DATA_NEEDED: min/max] |
| MSL-Level | [DATA_NEEDED: MSL rating] | — |
| RoHS-Status | Compliant | — |
| Technology | — | Smart SIPMOS (vertical N-channel MOSFET with charge pump) |
| Number of Channels | — | 1 |
| Input Type | — | CMOS-compatible, ground-referenced |
| On-State Resistance (R_DS(on)) | — | 50 mOhm (typical) |
| Continuous Load Current | — | 5.8 A |
| Standby Current | — | Very low (per datasheet) |
| Overtemperature Protection | — | Yes, with autorestart |
| Diagnostic Feedback | — | Yes (open-load, short-circuit, overtemperature) |
| RoHS / Pb-Free | — | Yes (Green product, Pb-free finish, J-STD-020) |
| Soldering | — | Pb-free reflow per IPC/JEDEC J-STD-020 |
| Qualification | — | Automotive-grade (PROFET family) |